Center pivots rotate around a central point to water a circular area. They save labor and use water efficiently. Rentals are less common than pumps, but seasonal or short-term setups exist for leased land or testing. This guide covers what to ask, how to plan and what to watch for. A dealer and electrician should be involved.
How pivots work
A pivot point connects to water and power. A pipeline on towers spans the field. Each tower has a motor that moves it forward, and a control panel manages speed and timing. Sprinklers or nozzles spray water over the crop.
See renting a linear irrigation system and renting a traveling gun irrigation for other large systems.
Is renting practical
Pivots are expensive to install. Renting suits farms that:
- Lease land for a short term.
- Want to test before buying.
- Need a temporary system during repairs.
- Irrigate special crops for a season.
Ask the dealer whether they rent or lease pivots and what services are included.
Span and field fit
Choose a pivot with the span length and number of towers that fit your field's radius. Check terrain, slopes, obstacles and corners. Pivots irrigate circles, leaving corners dry. Some have corner systems or end guns. See SARE publications, the USDA NRCS and your state page.
Water supply and pressure
Check flow rate and pressure available. The pivot needs enough flow to keep up with crop needs. Pressure must match the sprinkler package. See irrigation pump rentals: types and sizing. Check well capacity and water rights. Filters protect nozzles from debris.
Nozzles and uniformity
Nozzle size and spacing decide how much water each part of the circle gets. Nozzles near the pivot point need less water than those at the end. Choose packages designed for your flow and pressure. Check for wear, plugging and leaks. Regular checks keep uniformity high.
Power and controls
Pivots may use electric motors, with power from the grid or a generator. Control panels manage speed, direction and shutdowns. Have an electrician check wiring, grounding and safety devices. Use lightning protection if needed.
Anchoring and wind
Pivots must be anchored securely. Parking pivots in high wind can tip or damage towers. Follow the dealer's instructions for anchoring, tower alignment and parking. Watch weather forecasts. Check wheel tracks for ruts.
Common mistakes to avoid
- Poor water supply.
- Wrong nozzle package.
- Weak anchoring.
- Ignoring tower alignment.
- No setup crew.
Inspect before you accept
Check spans, gearboxes, tires, nozzles, control panel, wiring and the pivot point. Test run. Photograph existing damage. See understanding rental equipment condition reports.
Safety
- Lock out power before service. See the farm machinery lockout-tagout procedure template.
- Stay away from towers while running.
- Watch for power lines when moving components.
- Do not climb on spans in wind.
- Keep children away.
- Follow electrical codes.
See the OSHA agricultural operations page and CDC NIOSH agriculture.
Transport and setup
Pivot parts are long and heavy. Setup needs trained crews. See DOT requirements for rented equipment transport and oversize load permits for rented equipment.
Costs and terms
Ask about seasonal rates, setup and tear-down, service, deposit and damage terms. See how to budget for farm equipment rentals and understanding rental agreements.
Planning the season
Plan setup before planting. Test the system with water before the crop needs it. Plan irrigation schedules based on soil moisture and weather. Keep spare nozzles, gaskets and tools. Plan for tear-down and storage.
Troubleshooting
If towers stop, check power and alignment. If water is uneven, check nozzles and pressure. If wheels rut, adjust speed or watering. If the panel faults, call the dealer or an electrician. Contact the dealer when unsure.
Cleaning and return
Flush lines, drain water, cover openings and clean. See returning farm equipment: cleaning and fuel rules.
A sample season
A grower leasing a field rents a center pivot for one season. The dealer sets it up, and an electrician connects power. The grower schedules irrigation from soil moisture readings and checks nozzles weekly. At season end the dealer tears down the system.
Questions to ask the dealer
- What span and tower count?
- What nozzle package is included?
- Who handles setup and teardown?
- What power and flow does it need?
- What service is included?
Scheduling irrigation
Water based on crop needs and soil moisture, not a fixed calendar. Use probes or weather data to decide when to irrigate. See renting a soil moisture probe for scheduling and renting a weather station for irrigation decisions. Avoid runoff by matching application to soil intake.
Keeping records
Record dates, hours, water applied and issues. See record keeping for farm equipment rentals.
Soil, slope and field preparation
Walk the circle and note rocks, ditches, fences, trees, wet spots and steep slopes. Fill ruts and remove obstacles that towers cannot clear. Very sandy or soft soils can bog wheels, and steep slopes can make towers slide or runoff worse. Ask your NRCS office about water management for your soils, and plan wheel track maintenance, such as filling ruts after the first pass.
Chemigation and fertigation
Some pivots inject fertilizer or chemicals through the water. That requires backflow prevention, check valves and injection equipment that meet legal requirements. Do not inject anything unless the dealer and local rules allow it. See renting a fertigation system for nutrient delivery and the EPA agriculture page.
Winterizing and storage
At season end, drain water from spans and gearboxes, grease fittings and park the pivot securely. Cover control panels, and ask the dealer how to protect motors. Record the final hours and any damage so that return inspection goes smoothly.
Budgeting beyond the rental fee
Add electric or fuel costs, labor for checks, nozzle replacements, water charges and possible repairs. Compare the full seasonal cost with custom irrigation services or other methods before you commit.
Bottom line
Center pivots save labor and water when supply, power, nozzles and anchoring are right. Plan the season, inspect often and schedule with data.
Frequently asked questions
Can I rent a center pivot?
Sometimes. Ask dealers about seasonal rentals or leases.
What do I need to run one?
Water supply, power, a level circle and a trained crew.
What about corners?
Standard pivots leave corners dry. Options exist to cover them.
Is wind a problem?
Yes. Anchor and park according to the dealer's guidance.