Farm Equipment Rentals
Irrigation and Water Equipment Rentals

Drip Irrigation Equipment Rentals

Rent drip irrigation equipment for rows, orchards and gardens: filters, regulators, injectors, tape layers, layout, installation, maintenance, winter care and costs.

5 min read1,070 wordsUpdated November 2026
Drip Irrigation Equipment Rentals: illustration of a center pivot and a diesel pump at a pond

Drip irrigation applies water slowly through emitters close to plant roots. It saves water, cuts weeds between rows and works well on vegetables, berries, orchards and vineyards. Most drip tape and tubing is bought rather than rented, but reusable components such as pumps, filter stations, injectors, tape layers and reels can be rented. This guide explains what to ask for and how to set up.

What can be rented

  • Filter stations. Screen, disc or sand media filters.
  • Pressure regulators and valves.
  • Fertilizer injectors.
  • Mainline and header pipe.
  • Tape layers and reels.
  • Pumps and power units.

Ask the dealer which parts are rental and which are sold.

System layout

A drip system has a water source, pump, filter, mainline, submains, laterals and emitters. Sketch the field with row length, spacing and slope. Short runs keep flow even, so break long rows into zones. See SARE publications, the USDA NRCS and your state page.

Drip Irrigation Equipment Rentals: illustration of a center pivot and a diesel pump at a pond
Illustration: a center pivot and a diesel pump at a pond. Original artwork for Farm Equipment Rentals.

Filtration

Emitters clog easily. Choose a filter sized for your flow and water quality. Well water with sand needs different filtration than pond water with algae. See renting a water filter for irrigation. Flush filters and lines regularly.

Pressure and flow

Drip tape works at low pressure, often a few psi. Use regulators to avoid blowing out tape. Match pump flow to the number of zones you run at once. See irrigation pump rentals: types and sizing.

Fertigation

Injectors add fertilizer to water. Use only products labeled for fertigation, and keep backflow protection in place. See renting a fertigation system for nutrient delivery.

Laying tape

Tape layers place tape and sometimes plastic mulch in one pass. Set depth, spacing and tension carefully. Keep emitters facing up. Avoid twisting or stretching the tape. Connect to headers with proper fittings, and flush lines before closing ends.

Common mistakes to avoid

  • Weak filtration.
  • Too much pressure.
  • Runs that are too long.
  • Skipping flushing.
  • No leak checks.

Inspect before you accept

Check filters, gauges, regulators, hoses, fittings and injectors. Test with water if possible. Photograph existing damage. See understanding rental equipment condition reports.

Safety

  • Lock out pumps before service. See the farm machinery lockout-tagout procedure template.
  • Relieve pressure before opening fittings.
  • Watch for trip hazards from tape and hoses.
  • Handle chemicals per labels.
  • Keep children away from pumps and injectors.

See the OSHA agricultural operations page and CDC NIOSH agriculture.

Transport

Reels and pipe need secure loading. See the equipment transport tie-down checklist.

Costs and terms

Ask about daily and weekly rates, deposits, delivery and cleaning. See how to budget for farm equipment rentals and understanding rental agreements.

Planning the season

Order tape and parts early. Plan layout and install before planting. Test for uniformity by catching water from emitters along a row. Set schedules from soil moisture, and keep spare fittings and punch tools.

Troubleshooting

If emitters clog, flush and check filters. If tape bursts, lower pressure. If water is uneven, check slope and run length. If pressure drops, look for leaks. Contact the dealer when unsure.

Cleaning and return

Flush, drain and clean filters. See returning farm equipment: cleaning and fuel rules.

A sample job

A berry grower rents a filter station and tape layer to install drip on new rows. The grower tests flow, flushes lines and schedules irrigation from soil probes. Rentals are cleaned and returned.

Questions to ask the dealer

  1. Which parts are rental?
  2. What filter size fits my flow?
  3. What pressure do I need?
  4. Can the dealer help with layout?
  5. What are cleaning requirements?

Soil moisture and scheduling

Drip wets a narrow strip, so roots stay near the line. Use probes to see how far water moves. See renting a soil moisture probe for scheduling. Adjust run times as crops grow and weather changes.

Winter care

Drain lines before freezing weather, and store filters and regulators dry. Pull tape if it will not be reused, and recycle where programs exist.

Keeping records

Record dates, flow, pressure, hours and repairs. See record keeping for farm equipment rentals.

Water quality testing

Before choosing filters, test your water for sand, iron, hardness, algae and pH. Iron and hard water can form deposits inside emitters, and algae from ponds can coat screens within days. Your extension office or a lab can run tests. Ask the dealer to match the filter to your results, and plan an acid or chlorine flush if the water is prone to clogging, following label directions and local rules.

Field prep and installation timing

Smooth beds, remove rocks and clods, and mark row ends before laying tape. Install when soil is workable but not wet, and when wind is calm so tape lays straight. Have crews ready for connections at headers, because delays leave open lines that collect dirt. Flush each line before closing the ends.

Estimating zones and flow

Add up emitters or tape length in each zone, multiply by flow per foot, and compare the total with pump capacity. If it exceeds capacity, make more zones and run them in turn. Keep elevation changes in mind, since downhill ends can run higher pressure than uphill ends. Pressure-compensating emitters help in uneven fields.

Labor and training

Drip installation takes more hands than most expect. Train workers to handle tape gently, make clean cuts and use the right fittings. A short walkthrough with the dealer saves time and prevents costly mistakes.

Comparing drip with other methods

Drip uses less water than sprinklers or flooding and keeps foliage dry, which can reduce disease. It costs more to set up, needs clean water and requires regular checks for leaks and clogs. For short-term or leased land, compare it with moving sprinklers or a traveling gun before committing to buried or surface lines.

Rodents, wildlife and mowers

Gophers, voles, deer and coyotes chew on tape. Walk lines often and patch holes with couplers. Keep mowers and cultivators away from lines. Mark ends and valves with flags so equipment does not snag them.

Bottom line

Drip works when filtration, pressure and layout are right. Rent the reusable parts, buy the consumables and plan the season.

Frequently asked questions

Can I rent drip tape?

Usually it is sold. Rent filters, injectors and layers.

What clogs emitters?

Sand, algae, minerals and poor filtration.

How long can rows be?

It depends on tape and slope. Ask the manufacturer.

Can I fertilize through drip?

Yes, with injectors, products labeled for it and backflow protection.

Keep reading

Irrigation and Water Equipment Rentals

Renting a Water Trailer for Livestock

Rent a water trailer for livestock on pasture and at events: tank sizes, troughs, float valves, hitching, winter care, water quality, cleaning, costs and safety checks.

Irrigation and Water Equipment Rentals

Renting a Diesel Irrigation Pump

Rent a diesel irrigation pump for fields without power: engine size, fuel use, run time, trailer mounts, priming, noise, emissions, safety, spill control and return checks.

Irrigation and Water Equipment Rentals

Renting a Water Cannon for Dust Control

Rent a water cannon for dust control on farm roads, feedlots and work sites: cannon types, pumps, tank trailers, range, nozzles, water supply, rules, safety and costs.

Irrigation and Water Equipment Rentals

Renting a Fogger for Barn Cooling

Rent a fogger for barn cooling: ultra-fine mist units, ventilation needs, humidity control, water quality, nozzle upkeep, electrical safety, disinfecting uses and costs.