Farm Equipment Rentals
Harvesting Equipment Rentals

Windrower Rentals: Hay and Specialty Crops

Rent a windrower for hay, alfalfa and specialty crops: draper and disc headers, conditioning, cutting height, drying, field speed, transport, safety and return checks.

5 min read1,054 wordsUpdated November 2026
Windrower Rentals: Hay and Specialty Crops: illustration of a combine unloading grain into a cart

Windrowers cut and lay crops in rows, and they handle the large-scale work of hay, alfalfa, grass seed and some specialty crops. Rented machines cover peak seasons without the cost of ownership. This guide helps you choose a header, set up the machine and plan the work around weather and baling.

Where windrowers shine

Windrowers cut and condition crops in one pass and place them in uniform rows. They suit:

  • Alfalfa and mixed hay.
  • Grass hay and grass seed.
  • Small grains for swathing.
  • Specialty crops such as canola, hemp or sorghum, depending on header and region.

See renting a swather for hay and grain for a similar overview, and renting a mower-conditioner for hay if a smaller tractor-drawn option works.

Header types

  • Draper header. Belts carry crop smoothly to the center. Gentle on leaves and good for varied crops.
  • Disc header. Rotating discs cut at higher speeds. Suited to fast hay cutting.
  • Sickle header. A reciprocating knife. Simple and widely used.
  • Auger header. Pushes crop to the center with an auger.

Ask which header the machine has and how it is suited to your crop and ground.

Windrower Rentals: Hay and Specialty Crops: illustration of a combine unloading grain into a cart
Illustration: a combine unloading grain into a cart. Original artwork for Farm Equipment Rentals.

Conditioning

Conditioners crush or crimp stems so moisture escapes faster. Rolls work well for thick stems such as alfalfa. Flails abrade the surface and suit some grasses. Adjust roll gap and pressure to the crop, since too aggressive conditioning strips leaves, and too light slows drying. Weather and humidity change the best setting from day to day. See SARE publications and your state page for regional guidance.

Setting cutting height and windrows

  1. Cutting height. Leave enough stubble for regrowth, especially alfalfa.
  2. Windrow width. Wide windrows dry faster.
  3. Windrow fluffiness. Loose windrows allow air to pass.
  4. Speed. Match speed to crop density and terrain.
  5. Consistency. Even windrows help balers.

Check windrows after the first pass and adjust forming shields.

Specialty crops

Some specialty crops need careful timing. Windrowing can help canola ripen uniformly, and some grass seed crops dry in windrows before combining. Check your extension office for recommendations. If you plan to combine from the windrow, ask about pickup headers. See renting a combine for small grain harvest.

Daily service

Check oil, coolant and hydraulic fluid. Grease fittings. Clean radiator screens, since chaff builds up quickly. Inspect knives, discs and draper belts. Carry spare sections, bolts and tools. Daily care prevents breakdowns during short weather windows.

Common mistakes to avoid

  • Wrong header for the crop.
  • Cutting too low.
  • Overconditioning.
  • Ignoring weather.
  • Skipping daily service.

Inspect before you accept

Check the header, knives or discs, draper belts, conditioner, gearboxes, hydraulics, tires, cab, lights and brakes. Test all functions. Photograph existing damage. See understanding rental equipment condition reports.

Safety

See the OSHA agricultural operations page.

Transport

Windrowers can be wide, and headers often travel separately. Use a header trailer and check rules. See renting a header trailer for transport, DOT requirements for rented equipment transport and oversize load permits for rented equipment.

Planning with the baler

Hay needs to be baled at the right moisture, so line up balers and labor. See renting a hay baler: round vs square, round baler rentals: sizing and net wrap and hay rake rentals: wheel and rotary.

Costs and terms

Ask about daily and weekly rates, fuel, header charges, delivery, deposit and weather delays. See how to budget for farm equipment rentals and understanding rental agreements.

Cleaning and return

Blow out chaff, clean the radiator, grease fittings and refuel if required. See returning farm equipment: cleaning and fuel rules.

A sample week

A farm with 100 acres of alfalfa rents a windrower with a draper header for four days. The farmer sets cutting height for regrowth, adjusts conditioning for humid mornings and forms wide windrows. The crop dries evenly, and bales follow on schedule. The farm cleans the machine and returns it on time.

Questions to ask the dealer

  1. Which header does the machine have?
  2. Can you provide conditioner settings?
  3. What are the fuel and service requirements?
  4. Is transport available?
  5. What are the return requirements?

Choosing between rent and custom hire

If you cut a few fields once or twice a year, a custom operator may cost less than renting and managing a windrower yourself. Renting makes sense when you have an experienced operator, flexible timing and several cuttings. Compare the daily rate, fuel, transport and your own labor against a custom price per acre. See the rental vs custom hire calculator.

Reading field conditions

Walk the field before cutting. Mark rocks, ditches, wet spots and gopher mounds, because hidden hazards break knives and discs. In alfalfa, check stand age and regrowth. In grass seed, check maturity and shatter risk. Choose the header and cutting height with those conditions in mind, and plan to slow down in rough areas.

Keeping records

Record dates, fields, headers, settings, weather and drying time. These notes help you pick the best cutting window next year and give you a record for landlords, partners or insurance. See record keeping for farm equipment rentals.

Matching crop moisture to the next step

Windrowed hay must dry to a safe moisture before baling, and the safe level differs for small squares, large squares and round bales. Test several spots with a probe or meter, and check inside the windrow, since the surface dries first. Baling too wet risks mold and heating, while baling too dry shatters leaves. If you plan to wrap or ensile, the target is different again. Confirm with your extension office and let the baler operator know the moisture before the first bale.

Bottom line

Windrowers speed hay and specialty crop work. Choose the right header, adjust conditioning, protect regrowth and coordinate with baling.

Frequently asked questions

Which header is best for alfalfa?

Draper headers are gentle, but disc and sickle headers also work. Ask the dealer.

Does conditioning speed drying?

Yes, by cracking stems. Over-conditioning can strip leaves.

Can I windrow specialty crops?

Some crops benefit. Ask your extension office.

What should I do daily?

Check fluids, grease fittings and clean the radiator.

Keep reading

Harvesting Equipment Rentals

Renting a Peanut Combine for Legume Harvest

Rent a peanut combine for legume harvest: digging and inverting, windrow curing, picker settings, moisture, losses, drying, hauling, safety and costs.

Harvesting Equipment Rentals

Soybean Combine Rentals: Flexible Headers

Rent a combine for soybeans: flexible draper or auger heads, low cutting height, reel settings, pod shatter, moisture windows, losses, field prep and residue management.

Harvesting Equipment Rentals

Renting a Swather for Hay and Grain

Rent a swather to cut hay and windrow grain: header types, conditioner options, cutting height, windrow shape, speed, drying time, hauling and a safe return plan.

Harvesting Equipment Rentals

Corn Combine Rentals: Headers and Settings

Rent a combine for corn: corn heads, row spacing, deck plates, snapping rolls, rotor settings, moisture targets, losses, drying costs and residue handling.