Farm Equipment Rentals
Harvesting Equipment Rentals

Renting a Hay Baler: Round vs Square

Choose between round and square balers for rental: bale size, handling gear, storage, feed use, selling hay, tractor needs, moisture, twine or net, and costs.

5 min read1,168 wordsUpdated November 2026
Renting a Hay Baler: Round vs Square: illustration of a combine unloading grain into a cart

Choosing between a round and a square baler is the first decision of a hay rental. Both make good hay, but they suit different farms, buyers and equipment. This guide compares the two, explains what to check on a rental baler and shows how to plan the work so the crop is baled at the right time.

Round balers

Round balers roll the windrow into a cylinder and wrap it with net or twine. They are popular on livestock farms because one operator can bale a lot of hay per day with little hand labor.

  • Speed and labor. Fast, and usually one person.
  • Bale sizes. Common sizes vary by model, and weights range widely.
  • Feeding. Bales can be unrolled, fed in rings or processed. See bale processor rentals for feed processing.
  • Outdoor storage. Round bales shed some rain, but losses grow with time.
  • Handling. Needs a loader, spear or grapple. See renting a bale grapple for handling.
  • Selling. Some buyers prefer round bales, but trucking is less efficient.

See round baler rentals: sizing and net wrap for details.

Square balers

Square balers make rectangular bales, small or large. Small squares are handled by hand or with accumulators, and large squares need loaders and equipment.

  • Stacking and shipping. Squares stack tightly and ship efficiently.
  • Selling. Squares often suit horse, dairy and retail buyers.
  • Labor. Small squares need more labor.
  • Indoor storage. Squares fit barns and sheds well.
  • Feeding. Easy to portion.
  • Capacity. Large squares bale fast but require stronger tractors and gear.

See square baler rentals: small and large squares.

Renting a Hay Baler: Round vs Square: illustration of a combine unloading grain into a cart
Illustration: a combine unloading grain into a cart. Original artwork for Farm Equipment Rentals.

How to decide

  1. Who buys or eats the hay? Horse owners and retail buyers often want squares.
  2. How will you handle bales? Do you have a loader, spear or accumulator?
  3. How will you store them? Barn or outdoors?
  4. How much labor do you have?
  5. What tractor do you have?
  6. How much hay do you make?

Ask your buyers and neighbors, and compare with the rental vs custom hire calculator.

Moisture and timing

Hay baled too wet can mold or heat, and hay baled too dry loses leaves. Test moisture with a probe or meter. Safe moisture varies by bale type and storage, so check with your extension office. See SARE publications and your state page. Plan cutting, drying and raking so the baler arrives when the hay is ready. See renting a swather for hay and grain, hay rake rentals: wheel and rotary and tedder rentals for hay drying.

Tractor needs

Balers need a tractor with the right horsepower, PTO speed and hydraulics. Large squares need more power than most round balers. Check hitch type, PTO shaft length and remote ports. Verify that the tractor can handle slopes with a loaded baler. See utility tractor rentals: sizing guide and row crop tractor rentals.

Twine, net and wrap

Round balers use net wrap or twine. Net wrap is faster and sheds water better, but costs more. Square balers use twine or wire. Ask the dealer whether supplies are included. Buy enough before you begin, since a stop for twine can cost a day.

A word from the farm radio

If baling goes quiet, the cab radio at least keeps you company, and you can find agricultural talk and farm news at farm.fm. It will not fix a broken knotter, but it may make the repair feel shorter, and nobody has yet found a podcast that bales hay for you.

Common mistakes to avoid

  • Baling too wet. Mold and heating.
  • Picking the wrong bale type for your handling gear.
  • Skipping the walkaround.
  • Running out of twine or net.
  • Ignoring the forecast.

Inspect before you accept

Check the pickup, belts or chamber, knotters or net system, bearings, chains, shields, tires and PTO shaft. Test the monitor and bale ejection. Photograph existing damage. See understanding rental equipment condition reports.

Safety

See the OSHA agricultural operations page.

Transport

Balers are wide. Check lights, brakes and road rules. See DOT requirements for rented equipment transport and oversize load permits for rented equipment.

Costs and terms

Ask about daily and weekly rates, delivery, supplies, deposit and weather delays. See how to budget for farm equipment rentals and understanding rental agreements.

Cleaning and return

Blow off chaff, clean the pickup and chamber, grease fittings and clear leftover twine or net. See returning farm equipment: cleaning and fuel rules.

A sample decision

A small farm with beef cattle and a front-end loader makes 150 round bales. The owner rents a round baler with net wrap for three days, tests moisture each morning and stores bales on gravel. A neighbor selling to horse owners rents a square baler instead and stacks in a barn.

Questions to ask the dealer

  1. What bale size does this baler make?
  2. What tractor do you recommend?
  3. Are net, twine and wire included?
  4. What are the return requirements?
  5. Can you provide a moisture and settings guide?

Keeping records

Record bale counts, field, cutting date, moisture and storage location. Records help you track yields, feed inventory and rental costs. See record keeping for farm equipment rentals.

Planning the baling window

Baling is the last step in a chain of cutting, drying and raking, and any weak link wastes the others. Look at the forecast several days ahead and decide whether the crop will reach target moisture. Reserve the baler for those days, and line up a loader, trailer and helpers. If rain interrupts, ask the dealer whether the rental can be paused or moved, and ask what fees apply. Many farms bale in the afternoon, once dew has lifted, and stop in the evening before moisture returns.

Troubleshooting in the field

If bales come out lopsided, change how you drive the windrow. If the baler plugs, slow down and check the windrow size. If twine or net fails, stop and check supply and routing. If the monitor warns of overload, reduce density or ground speed. Keep the dealer's phone number handy, and ask what the baler should and should not be asked to do.

Bottom line

Choose round bales for speed and low labor, and square bales for stacking and selling. Match the baler to your gear and buyers, test moisture and plan supplies.

Frequently asked questions

Which is better, round or square?

It depends on handling gear, storage, labor and buyers.

What moisture should I bale at?

It varies by bale type and storage. Check local guidance and test each field.

Is net wrap worth it?

It saves time and sheds water, but costs more than twine.

What tractor do I need?

Check the baler's PTO, hydraulic and horsepower needs. Large squares need more power.

Keep reading

Harvesting Equipment Rentals

Round Baler Rentals: Sizing and Net Wrap

Rent a round baler with the right bale size, chamber type, net wrap or twine, tractor match, moisture settings, bale shape, handling plan, safety and return checklist.

Harvesting Equipment Rentals

Grain Cart Rentals for Harvest Efficiency

Rent a grain cart to speed harvest: capacity, auger output, scales, tracks versus tires, tractor requirements, unloading technique, soil protection, safety and rental terms.

Harvesting Equipment Rentals

Renting a Bale Grapple for Handling

Rent a bale grapple or spear for loaders and skid steers: types, capacity, tractor stability, handling round and square bales, safety, mounting systems and return checks.

Harvesting Equipment Rentals

Hay Rake Rentals: Wheel and Rotary

Rent a wheel or rotary hay rake: windrow forming, merging, raking speed, leaf loss, tractor needs, ground conditions, setup, safety and a plan to keep hay moving to the baler.