Farm Equipment Rentals
Harvesting Equipment Rentals

Renting a Combine for Small Grain Harvest

Rent a combine for wheat, oats, barley or rye: header and reel setup, cylinder and concave settings, moisture targets, losses, straw handling, hauling and a harvest-day plan.

5 min read1,084 wordsUpdated November 2026
Renting a Combine for Small Grain Harvest: illustration of a combine unloading grain into a cart

Wheat, barley, oats and rye ripen on their own schedule, and the window between ready and ruined can be short. Hail, wind and rain cause shatter and sprouting, and harvest delays cost quality. That is why many small farms look for a combine rental or a custom crew. Renting works if you have an operator, trucks and a plan. This guide covers machine setup for small grains and the practical steps around it.

Know when the crop is ready

Small grains are ready when kernels are hard and moisture is within the range suited to your region and crop. Many growers aim for moisture low enough to store safely, or they dry grain after harvest. Check with your extension office for target moisture and test weight; see SARE publications, the USDA NRCS and your state page. Use a handheld moisture tester, and sample several parts of the field.

Choosing the machine and header

  • Combine size and capacity. Match to acreage and trucks.
  • Grain header. A platform header with a reel is the standard for small grains. Width varies.
  • Draper or auger platforms. Draper heads feed more gently and handle varied crops.
  • Straw chopper and spreader. Important for residue management.
  • Tires or tracks. Match ground conditions.
  • Monitor and yield sensors. Optional but useful.
  • Hours and service history. Ask for records.

If you need a different header for another crop, see soybean combine rentals: flexible headers and corn combine rentals: headers and settings.

Renting a Combine for Small Grain Harvest: illustration of a combine unloading grain into a cart
Illustration: a combine unloading grain into a cart. Original artwork for Farm Equipment Rentals.

Setting up the header

  • Cutting height. Cut high enough to avoid picking up rocks and excess straw, but low enough to capture heads of short or lodged plants.
  • Reel speed. Slightly faster than ground speed, so the reel lays crop onto the table without shattering heads.
  • Reel position. Forward and low in down or tangled crops, further back in standing crop.
  • Knife and guards. Sharp, aligned and clean.
  • Auger and flighting. Set clearance to feed evenly.
  • Float. Let the header follow the ground without digging.

Walk the field first and note rocks, holes and wet spots.

Setting the cleaning system

  • Cylinder or rotor speed and concave clearance. Follow the manual for your crop, then adjust. Too aggressive cracks grain and breaks straw, while too gentle leaves unthreshed heads.
  • Fan speed. Enough to blow out chaff but not lose grain.
  • Sieve openings. Choose settings suited to kernel size.
  • Grain tank samples. Check for cracks, trash and unthreshed heads.
  • Return flow. Watch tailings for excess volume.

Small grains differ. Wheat, barley and oats thresh differently. Ask the owner or dealer for starting settings.

Measuring losses

Do not trust the tank alone. Stop the combine and check behind it:

  1. Header loss. Count kernels on the ground in front of and under the header.
  2. Separator loss. Count kernels in straw behind the combine.
  3. Shoe loss. Check chaff for kernels.
  4. Compare to a loss chart or standard guidance for your crop.
  5. Adjust, then check again.

Losses vary across the field, so check several spots.

Straw and residue

Straw can be baled, chopped and spread or left in windrows. If you plan to bale, set the combine to leave straw in windrows and plan baling. If you chop, adjust the chopper and spreader width to spread evenly, since uneven residue hurts the next crop. Heavy straw can plug planters. See renting a hay baler: round vs square and no-till drill rentals: why farmers rent.

Logistics

Common mistakes to avoid

  • Harvesting too wet. Spoilage risk.
  • Ignoring losses. Money left in the field.
  • Wrong reel speed. Shattering and header loss.
  • Skipping the walkaround. Missing pins and chains stop the job.
  • Poor straw spreading. Problems next season.

Inspect before you accept

Check the header, knife, reel, auger, feeder chain, cylinder, concave, sieves, belts, chains, tires, hydraulic hoses, lights and monitor. Test fire extinguishers. Photograph existing damage. See understanding rental equipment condition reports.

Safety

See the OSHA agricultural operations page.

Costs and terms

Ask about daily and weekly rates, fuel, header charges, delivery, deposit, damage terms and rain-delay policies. Compare with custom harvesting. See how to budget for farm equipment rentals, understanding rental agreements and the rental vs custom hire calculator.

Cleaning and return

Clean grain and chaff from the combine, blow out dust and radiators, grease fittings and refuel if required. Check for leftover grain in the tank and unloading auger. See returning farm equipment: cleaning and fuel rules.

A sample harvest day

A farmer with 80 acres of winter wheat samples moisture on a hot afternoon and sets a start date. The farmer rents a combine with a 25-foot header, reserves two trucks and arranges bin space. On day one, the farmer runs a test pass, checks losses and tweaks reel speed and fan. The crew harvests through the evening and finishes in two days. The farmer bales straw the following week and cleans the combine before return.

Questions to ask the dealer

  1. What header sizes and types are available?
  2. What starting settings do you recommend for my crop?
  3. What are the fuel and cleaning requirements?
  4. What support is available during harvest?
  5. What happens in a breakdown?

Bottom line

Rent a small grain combine only with a plan for operator, trucks, storage and straw. Set the header and cleaning system for your crop, measure losses and respect safety rules.

Frequently asked questions

When should I harvest small grains?

When kernels are hard and moisture is at safe levels for your crop and region. Use a moisture tester and local guidance.

How do I check for grain losses?

Count kernels behind the header, separator and shoe, and compare with standard loss guides.

Should I bale or chop straw?

It depends on your needs. Bale for bedding or sale, chop and spread to return residue.

What is the biggest fire risk?

Dust and residue buildup around hot parts. Keep the machine clean and carry extinguishers.

Keep reading

Harvesting Equipment Rentals

Soybean Combine Rentals: Flexible Headers

Rent a combine for soybeans: flexible draper or auger heads, low cutting height, reel settings, pod shatter, moisture windows, losses, field prep and residue management.

Harvesting Equipment Rentals

Round Baler Rentals: Sizing and Net Wrap

Rent a round baler with the right bale size, chamber type, net wrap or twine, tractor match, moisture settings, bale shape, handling plan, safety and return checklist.

Harvesting Equipment Rentals

Renting a Sickle Bar Mower for Rough Terrain

Rent a sickle bar mower for slopes, ditches and rough ground: knife and guard care, cutting height, tractor needs, speed, slope safety, debris, return checks and costs.

Harvesting Equipment Rentals

Renting an Onion Harvester for Bulb Crops

Rent an onion harvester for bulb crops: undercutting, windrowing, curing, topping, loading, bruising control, storage, labor, safety and costs for small acreage.