A roller mill passes grain between steel rollers that crack, crimp or flatten kernels. It makes fewer fines than a hammer mill, so it suits many cattle, sheep and goat rations. Renting one lets a farm process a season's grain or test whether rolled feed pays. This guide covers settings, use and safety.
How a roller mill works
Grain feeds from a hopper into a gap between two rollers. The rollers rotate toward each other, crushing the kernel. Corrugated rolls crack and break kernels, and smooth rolls flake or crimp. Some mills have more than one set of rolls. Adjusting the gap changes particle size.
Compare with renting a hammer mill for feed grinding and renting a pellet mill for custom feed.
Why roll grain
Rolling breaks the seed coat so animals can digest the starch. Compared with fine grinding, rolling leaves larger particles, which can reduce digestive upset in ruminants. The right processing depends on species, grain and ration. Ask your nutritionist or extension office. See SARE publications and your state page.
Settings
- Roll gap. Narrower for finer cracking, wider for coarse.
- Corrugation. Choose fine or coarse rolls for the grain.
- Feed rate. Even feed prevents plugging.
- Moisture. Dry grain cracks cleanly, and tough grain may crimp or gum.
- Roll speed. Match to the manual.
Run a small test and check particle size by sieve or visual inspection.
Power and throughput
Check motor or PTO needs. Throughput depends on roll size, gap and grain. Larger mills handle more bushels per hour. Keep the hopper steady, and avoid starving or flooding the rolls.
Dust, noise and fire
Grain dust is flammable and irritating. Keep the area clean and ventilated, and wear a respirator and hearing protection. Do not allow sparks, open flames or smoking. Keep extinguishers nearby. Check bearings and belts for heat.
Foreign objects
Rocks and metal ruin rolls and can create sparks. Use screens and magnets in the feed stream, and inspect grain before processing. If you hear unusual sounds, stop right away.
Storage of rolled grain
Rolled grain spoils faster than whole grain because more surface is exposed. Process only what you will use within a short period, and store in clean, dry bins. See renting a feed bin for bulk storage.
Common mistakes to avoid
- Setting the gap too tight.
- Wet grain.
- Ignoring foreign objects.
- Poor dust control.
- Storing too long.
Inspect before you accept
Check rolls, bearings, gap adjusters, feeder, belts, shields and motor. Run the mill empty. Photograph existing damage. See understanding rental equipment condition reports.
Safety
- Lock out before servicing. See the farm machinery lockout-tagout procedure template.
- Keep hands and clothing away from rolls.
- Keep PTO shields in place. See the PTO safety shield inspection form.
- Wear hearing and respiratory protection.
- Clean dust regularly.
See the OSHA agricultural operations page and CDC NIOSH agriculture.
Transport
Mills are heavy. Use a trailer and tie-downs. See the equipment transport tie-down checklist.
Costs and terms
Ask about daily and weekly rates, delivery, deposit and wear charges. See how to budget for farm equipment rentals and understanding rental agreements.
Planning the day
Decide how much grain to roll and where it goes. Prepare bins or bags. Check power and weather. Assign roles. Keep tools and spare parts. Take samples for the nutritionist. Keep records of batches.
Troubleshooting
If kernels are not cracked, narrow the gap. If fines are high, widen it. If the mill plugs, check feed rate and moisture. If rolls squeal, stop and check bearings. Contact the dealer when unsure.
Cleaning and return
Brush out the mill, clean rolls and grease bearings. See returning farm equipment: cleaning and fuel rules.
A sample job
A sheep farm rents a roller mill to crack corn for winter rations. The farmer tests a coarse setting, checks particle size and rolls a week's worth at a time. Dust stays under control, and the mill is cleaned and returned.
Questions to ask the dealer
- What roll size and corrugation?
- What power does it need?
- What throughput should I expect?
- What are the cleaning requirements?
- Can I test a small batch?
Matching processing to the animal
Sheep and goats often do well on cracked or whole grain, while cattle may benefit from rolled corn. Horses may need different processing and may not suit a roller mill setup. Poultry and swine often need finer particles. Ask your nutritionist for the best processing for your animals, and watch manure for whole kernels as a check.
Keeping records
Record dates, batches, roll gap and repairs. See record keeping for farm equipment rentals.
Checking particle size
A simple way to check results is to pour a sample onto a clean surface and look for whole kernels, coarse pieces and fines. A sieve set gives numbers, but a visual check works well for most farms. Take samples at the start, in the middle and at the end of a run, since settings can drift. Adjust the gap in small steps, and record the setting that works best for each grain.
Handling different grains
Corn, barley, oats and wheat behave differently in a roller mill. Corn usually needs a tighter gap or corrugated rolls to crack well. Oats are softer and may need a wider gap. Wheat can gum rolls if it is high in moisture. Mixed grains can be run together, but they may process unevenly. Ask the dealer for starting settings for your grain.
Keeping the mill clean
Dust and chaff collect in corners and around bearings. Brush or vacuum the mill after each run, and avoid blowing dust into the air. Check belts and guards for buildup. A clean mill runs cooler and is less of a fire risk, and it makes inspection easier for the next user.
Bottom line
A roller mill makes cracked or flaked grain with fewer fines. Choose gap and rolls for your animals, control dust and keep foreign objects out.
Frequently asked questions
Roller mill or hammer mill?
Roller mills make fewer fines and suit many ruminants. Hammer mills make finer feed.
How do I set the gap?
Start with the manual, test a batch and adjust.
Does moisture matter?
Yes. Dry grain cracks cleanly.
How long can I store rolled grain?
Not long. Use it within a short period.