Farm Equipment Rentals
Livestock and Hay Equipment Rentals

Renting a Feed Bin for Bulk Storage

Rent a feed bin for bulk storage: sizes, hopper bottoms, augers, aeration, moisture control, site and foundation, delivery trucks, pest control, safety and cleaning.

5 min read1,020 wordsUpdated November 2026
Renting a Feed Bin for Bulk Storage: illustration of a livestock trailer and squeeze chute beside a hay barn

Bulk feed can cost less per ton and save handling time, but it needs a bin. Renting a bin helps farms with seasonal demand, new operations and trials. This guide covers sizing, siting, filling, feeding out and safe use.

Bin types

  • Small steel feed bins. Hopper bottoms and augers for pellets and grain.
  • Poly bins. Plastic, resistant to rust.
  • Temporary bins and bags. Short-term storage.
  • Silos. Larger and often fixed.

See renting a grain bin for temporary storage for grain-specific uses.

Sizing

Match bin capacity to delivery loads and feed rate. A bin that holds a delivery with a margin lets you avoid frequent orders. Too large a bin lets feed sit and go stale. Calculate daily use, and plan restocks before bin empties. Ask your feed supplier about delivery sizes.

Renting a Feed Bin for Bulk Storage: illustration of a livestock trailer and squeeze chute beside a hay barn
Illustration: a livestock trailer and squeeze chute beside a hay barn. Original artwork for Farm Equipment Rentals.

Site and foundation

Place the bin on a level pad of concrete or compacted base. Check access for delivery trucks, including overhead wires, turning space and weight limits. Keep the bin away from low spots and flood areas. Provide space for the auger and for feeding equipment. See your local rules on setbacks. See the USDA NRCS and your state page.

Filling and emptying

Bins fill by truck auger, pneumatic blower or from above. Check that the bin's fill pipe matches the supplier's equipment. Unload slowly to avoid dust and blockages. At feed-out, augers move feed to carts or feeders. Check that the auger motor and wiring match your power supply. Use lockouts for servicing.

Moisture, aeration and pests

Moisture spoils feed. Seal lids and doors, and check for leaks. Aeration keeps feed cool and dry in some systems. Control rodents and insects with sealing, clean surroundings and approved controls. Do not mix fresh feed with old feed. Check bins monthly for mold and caking. See SARE publications.

Bridging and flow

Feed can bridge or arch in a bin, stopping flow. Moist or fine feed bridges more. Do not climb into a bin to break a bridge. Use tools from outside, and follow bin manufacturer guidance.

Common mistakes to avoid

  • Poor site for trucks.
  • Mismatched fill pipes.
  • Leaky lids.
  • Mixing old and new feed.
  • Entering bins.

Inspect before you accept

Check the bin walls, welds, lids, ladders, auger, hopper, legs and bolts. Test the auger. Photograph existing damage. See understanding rental equipment condition reports.

Safety

  • Never enter a bin with feed or grain. Flowing material can bury a person in seconds.
  • Lock out augers before service. See the farm machinery lockout-tagout procedure template.
  • Use ladders and cages correctly.
  • Watch for power lines when delivering.
  • Keep children away.

See the OSHA agricultural operations page and CDC NIOSH agriculture.

Transport and setup

Bins are large and may need cranes or special trailers. See DOT requirements for rented equipment transport and oversize load permits for rented equipment.

Costs and terms

Ask about monthly rates, delivery, setup, deposit and damage terms. See how to budget for farm equipment rentals and understanding rental agreements.

Planning the setup

Choose a site, check access and prepare the pad. Arrange delivery of the bin and feed. Plan power for augers. Set up a feed ordering schedule. Keep spare parts and tools. Keep records of feed received and used.

Troubleshooting

If feed does not flow, check for bridging, moisture and auger blockages. If the auger trips, check power and loads. If pests appear, clean and seal. If the lid leaks, replace gaskets. Contact the dealer when unsure.

Cleaning and return

Empty and sweep the bin, clean the auger and dry thoroughly. See returning farm equipment: cleaning and fuel rules.

A sample setup

A small dairy rents a 10-ton bin for a season. The farmer prepares a concrete pad, arranges a truck delivery and uses an auger to fill a cart. Feed stays dry, and the dairy decides to buy a bin after the season.

Questions to ask the dealer

  1. What capacity and fill system?
  2. Does it include an auger?
  3. What foundation does it need?
  4. What are the cleaning requirements?
  5. Can it be delivered and set?

Feed quality and rotation

Use a first-in, first-out approach. Empty the bin completely and clean it before refilling when you change feeds. Check feed for off smells, mold, clumps or insects. Keep records of delivery dates, and test feed if you suspect problems. Do not feed spoiled feed.

Keeping records

Record deliveries, feed use and maintenance. See record keeping for farm equipment rentals.

Delivery planning with your supplier

Call your feed supplier before the bin arrives. Ask about truck size, fill system and the minimum order. Give them directions, gate widths and overhead clearances, and mark the fill pipe so the driver connects to the right port. Ask about delivery windows and how much notice they need. Some suppliers can match deliveries to your feed use so the bin never runs out.

Cold, heat and condensation

Steel bins swing with temperature, and warm moist air can condense inside on cold nights. Condensation wets feed near the walls and starts mold. Ventilate according to the bin's design, keep lids closed against rain and check the top of the feed for crusting. In hot weather, shade or paint bins light colors to keep feed cooler.

Medicated and special feeds

If you store medicated feed, label the bin and keep records of what was in it. Clean the bin and lines before switching to non-medicated feed. Follow your veterinarian's directions and any withdrawal times. Never mix different species' feeds if one contains additives that are unsafe for another. Mark bins clearly so helpers do not feed the wrong thing.

Bottom line

A feed bin saves handling and money when sited well and managed carefully. Keep feed dry, keep trucks in mind and never enter a bin.

Frequently asked questions

How big should my bin be?

Big enough for a delivery with a margin, but small enough to use feed fresh.

What foundation do I need?

A level, compacted or concrete pad with truck access.

Is it safe to enter a bin?

No. Flowing feed can bury a person.

How do I prevent mold?

Seal lids, control moisture and rotate feed.

Keep reading

Livestock and Hay Equipment Rentals

Renting a Grain Bin for Temporary Storage

Rent a grain bin for temporary storage: sizes, aeration, fill and unload systems, moisture and temperature checks, pest control, site prep, safety and records.

Livestock and Hay Equipment Rentals

Renting a Grain Dryer for Harvest Moisture

Rent a grain dryer to reach safe storage moisture: batch, continuous and in-bin types, fuel, capacity, temperature, cooling, energy costs, monitoring, safety and set-up steps.

Livestock and Hay Equipment Rentals

Renting a Feed Mixer Wagon for Rations

Rent a feed mixer wagon for rations: vertical vs horizontal augers, capacity, scales, mixing order, tractor needs, knife wear, cleaning, safety and costs for beef and dairy.

Livestock and Hay Equipment Rentals

Renting a Feed Bunk Cleaner

Rent a feed bunk cleaner to remove refusals and keep bunks fresh: blades, skid steer or tractor mounts, hydraulics, concrete fit, cleaning routine, safety and costs.