Farm Equipment Rentals
Harvesting Equipment Rentals

Renting an Onion Harvester for Bulb Crops

Rent an onion harvester for bulb crops: undercutting, windrowing, curing, topping, loading, bruising control, storage, labor, safety and costs for small acreage.

5 min read1,029 wordsUpdated November 2026
Renting an Onion Harvester for Bulb Crops: illustration of a combine unloading grain into a cart

Onion harvest involves loosening bulbs, curing them so necks dry and skins set, then topping and loading. Machines range from small undercutters to complex harvesters that top and load. Renting helps growers with limited acreage or a short window. This guide gives an overview. Always follow local guidance and buyer specifications.

Harvest steps

  1. Maturity. Tops fall over and necks soften.
  2. Undercutting. A blade cuts roots and loosens bulbs.
  3. Windrowing or lifting. Bulbs are laid for curing.
  4. Curing. Bulbs dry in the field or in a shed.
  5. Topping and loading. Machines cut tops and load bulbs.

See renting a potato harvester for root crops and renting a carrot harvester for vegetables.

Types

  • Undercutters. Blades loosen bulbs.
  • Windrowers. Gather bulbs into rows.
  • Toppers and loaders. Remove tops and load into trucks.
  • Combination machines. Do several steps.

Ask which types the dealer offers and what rows they fit.

Renting an Onion Harvester for Bulb Crops: illustration of a combine unloading grain into a cart
Illustration: a combine unloading grain into a cart. Original artwork for Farm Equipment Rentals.

Curing and weather

Cured onions store longer and resist disease. Curing needs warm, dry weather with air movement. Hot sun can cause sunscald, and rain can cause rot. Check forecasts, and consider curing in sheds with controlled ventilation. Follow guidance from your extension office and buyer. See SARE publications, the USDA NRCS and your state page.

Setting the machine

  1. Undercutter depth. Below the bulbs without lifting too much soil.
  2. Ground speed. Slow enough to avoid bruising.
  3. Topping height. Leave a short neck.
  4. Belt speed. Match to capacity.
  5. Drop heights. Keep low.

Test a short section and inspect bulbs for cuts and bruises.

Handling and storage

Bruised onions rot in storage. Keep drop heights low and use padded surfaces. Move onions out of the sun. Store in ventilated bins or sheds, with temperature and humidity set to variety and use. Check stored onions regularly and remove soft bulbs.

Labor

Even with machines, hand labor is needed for sorting and moving bins. Heat and dust are issues. Provide water, shade and dust masks. Plan work in the cool part of the day.

Common mistakes to avoid

  • Harvesting before maturity.
  • Poor curing.
  • Rough handling.
  • Leaving onions in the sun.
  • No storage plan.

Inspect before you accept

Check blades, belts, chains, toppers, bearings, hydraulics, tires and shields. Test the machine empty. Photograph existing damage. See understanding rental equipment condition reports.

Safety

See the OSHA agricultural operations page and CDC NIOSH agriculture.

Transport

Harvesters can be wide. Check lights and road rules. See DOT requirements for rented equipment transport.

Costs and terms

Ask about daily and weekly rates, tractor needs and wear charges. Compare with custom harvest or hand labor using the rental vs custom hire calculator. See how to budget for farm equipment rentals and understanding rental agreements.

Tractor needs

Check horsepower, PTO and hydraulics. See utility tractor rentals: sizing guide and row crop tractor rentals.

Planning the harvest

Check maturity and weather, and plan around orders. Schedule undercutting, curing and topping so bulbs are not left exposed too long. Arrange crew, bins and storage. Keep spare parts and tools. Keep records of fields and curing times.

Working with buyers

Buyers set size, color and defect limits. Ask for specs and test samples early. Adjust topping and handling to improve quality. Keep traceability records for food safety.

Troubleshooting

If bulbs are bruised, slow down and lower drop heights. If necks are too long, adjust topping. If bulbs are cut, adjust depth. If the machine plugs, slow down and clear. Contact the dealer when unsure.

Cleaning and return

Clean soil and plant matter from the machine, grease fittings and wash off. See returning farm equipment: cleaning and fuel rules.

A sample job

A small onion grower rents an undercutter and a topper-loader for one week. The grower undercuts and windrows, waits for curing weather and tops when necks are dry. Bulbs go to ventilated bins, and the grower cleans the machines for return.

Questions to ask the dealer

  1. What equipment types are available?
  2. What tractor do you recommend?
  3. What row spacing does it fit?
  4. What are the return requirements?
  5. Can you provide settings guidance?

Keeping records

Record dates, fields, curing times, yields and repairs. See record keeping for farm equipment rentals.

Judging maturity and curing progress

Walk the field and check tops, necks and bulb size. When most tops have fallen and necks are soft, bulbs are close to ready. During curing, necks dry and outer skins turn papery. Pull a few bulbs and squeeze the neck to check for moisture. Cure too little and bulbs rot in storage, and cure too long in hot sun and they sunscald. Many growers keep a simple log of dates, weather and neck condition so each season gets better.

Storage checks

After harvest, check bins and sheds for airflow and temperature. Remove soft or diseased bulbs, since a few bad onions can ruin a lot. Watch humidity, because wet air encourages rot. If you plan to sell through the winter, plan regular inspections and note the dates. If storage space is short, discuss early sales with buyers before bulbs sit too long.

Equipment checks during harvest

Check knives, belts and chains at the start of each day and at every break. Dust and dry tops wear parts quickly and can start fires near hot surfaces, so blow off the machine often. Keep spare belts, bolts and blades on hand and call the dealer early if a part needs replacing. Carry a fire extinguisher on the tractor and the harvester.

Bottom line

Onion harvest is a sequence from undercutting to storage. Rent the right machines, cure carefully, handle gently and plan labor and bins.

Frequently asked questions

Why cure onions?

To dry necks and set skins so they store longer.

When should I harvest?

When tops fall and necks soften, following local guidance.

How do I avoid bruising?

Slow down, lower drop heights and use padded surfaces.

Do I need storage?

Yes. Plan ventilated, cool storage for cured onions.

Keep reading

Harvesting Equipment Rentals

Renting a Potato Harvester for Root Crops

Rent a potato harvester for root crops: single and two-row types, vine killing, soil conditions, bruising control, speed, sorting crew, storage, hauling, safety and costs.

Harvesting Equipment Rentals

Renting a Carrot Harvester for Vegetables

Rent a carrot harvester for vegetables: top-pulling vs lifting types, soil moisture, topping, bruising, sorting and cooling, labor, safety and costs for small growers.

Harvesting Equipment Rentals

Renting a Beet Harvester for Sugar Beets

Rent a beet harvester for sugar beets: topping, lifting, cleaning, tare control, frost and storage timing, trucks, piling, safety and how to work with the processor.

Harvesting Equipment Rentals

Renting a Combine for Small Grain Harvest

Rent a combine for wheat, oats, barley or rye: header and reel setup, cylinder and concave settings, moisture targets, losses, straw handling, hauling and a harvest-day plan.