Sickle bar mowers are among the oldest mowing tools, and they still earn a place on rough ground. They are quiet, throw little debris and can cut close on slopes, ditches and fence lines. A rental covers a few days of work without a purchase. This guide covers setup, care and safety on rough terrain.
How they work
A sickle bar has a row of triangular knife sections that slide back and forth through stationary guards. The shearing action cuts stems like scissors. The bar rides low and follows the ground, which helps on uneven areas.
Compare with disc mower rentals for pasture and hay and renting a flail mower for pasture management.
Where they fit
- Ditches and banks.
- Fence lines and orchard rows.
- Small hay fields.
- Steep or rough pasture.
- Areas where thrown debris is a hazard.
For heavy brush see renting a brush hog for overgrown fields and bulldozer rentals for land clearing.
Mounts and tractor needs
Sickle bars come as three-point mounts, side-mounted or trailed. Check hitch, PTO or hydraulic drive, and weight. Many work well with small tractors. Slope work demands a stable tractor with good traction. See compact tractor rentals for small farms and utility tractor rentals: sizing guide.
Knives and guards
The cutting system is only as good as the sections and guards. Look for:
- Sharp, undamaged sections.
- Tight rivets.
- Guards aligned with the knife.
- Wear plates and hold-downs set for correct clearance.
- Knife head and pitman in good condition.
Ask for spare sections and tools. Carry a file or stone to touch up edges.
Setting up
- Cutting height. Adjust with shoes or skids.
- Bar angle. Tilt slightly for the ground.
- Knife speed. Match ground speed to crop density.
- Guard alignment. Align after any strike.
- Float. Let the bar follow terrain.
Run a test pass and check the cut.
Working slopes and ditches
Slopes are the main danger. Slow down, keep the tractor stable and avoid sudden turns. Drive up and down slopes when you can, and avoid mowing across steep grades unless the tractor and mower are rated for it. Wear a seatbelt, check ROPS and keep a low center of gravity. See the tractor rollover prevention checklist. For ditches and drainage see excavator rentals for farm drainage and digging.
Debris and hazards
Scout the area before mowing. Remove or mark rocks, stumps, wire and trash. Sickle bars can jam or break on hard objects. If the bar hits something, stop, shut down and inspect before continuing.
Common mistakes to avoid
- Running dull knives.
- Ignoring guard alignment.
- Driving too fast.
- Mowing steep slopes carelessly.
- Skipping the walkaround.
Inspect before you accept
Check the knife, sections, guards, pitman, bearings, bar, hitch and tires. Test the drive. Photograph existing damage. See understanding rental equipment condition reports.
Safety
- Lock out before clearing, sharpening or adjusting. See the farm machinery lockout-tagout procedure template.
- Keep PTO shields in place. See the PTO safety shield inspection form.
- Wear gloves around knife sections.
- Keep bystanders clear.
- Watch for power lines, ditches and soft ground.
See the OSHA agricultural operations page.
Transport
Sickle bars fold or lift for transport. Check lights, width and road rules. See DOT requirements for rented equipment transport.
Costs and terms
Ask about daily and weekly rates, delivery, spare sections and wear charges. See how to budget for farm equipment rentals and understanding rental agreements.
Planning a day on rough ground
Scout the area on foot first. Mark hazards, plan a path and decide where you will turn. Mow when the ground is firm and the crop is dry. Bring spare sections, bolts, grease and basic tools. Work with a partner if the terrain is risky, and tell someone where you are. Take breaks, since rough ground is tiring.
Troubleshooting
If the bar tears instead of cuts, check sharpness and guard clearance. If it plugs, slow down and check knife speed. If it vibrates, check bolts and the pitman. If it leaves strips, check overlap and cutting height.
Cleaning and return
Clear plant matter from the bar, grease fittings and wash off mud. See returning farm equipment: cleaning and fuel rules.
A sample job
A small farm rents a sickle bar for a weekend to clear ditch banks and steep pasture. The farmer scouts for rocks, mows slowly and keeps the tractor stable. Knives stay sharp thanks to a spare set and a quick touch-up. The bar is returned clean.
Questions to ask the dealer
- What mount and width is this bar?
- What tractor do you recommend?
- What is the knife and guard condition?
- Are spare sections included?
- What are the return requirements?
Keeping records
Record dates, areas, repairs and results. See record keeping for farm equipment rentals.
Sharpening and replacing sections
Knife sections dull quickly in sandy soil and dry grass. A dull section tears stems and pulls the machine. Carry a file or stone and touch up edges between fields. Replace cracked or missing sections as soon as you see them, using the correct rivets and torque. After any strike on a rock or post, stop and check guards for bending, since a misaligned guard cuts poorly and wears sections fast. Ask the dealer to show you how the knife head and pitman are serviced.
Choosing the right season and time
Mow ditches and rough ground when the soil is dry and firm, since wet banks give way under tractors. Early summer growth is thick but tender, and late-season growth is tougher. Avoid mowing during nesting seasons if wildlife is a concern, and check your state resources for guidance. Cutting before seed set helps control weeds. Plan around dew, wind and forecast so the work goes quickly and safely.
Bottom line
A sickle bar mower is a quiet, low-cost tool for rough ground. Keep knives sharp, align guards, scout carefully and respect slopes.
Frequently asked questions
When should I choose a sickle bar?
For ditches, slopes and rough ground where thrown debris is a risk.
How do I keep it cutting?
Keep sections sharp and guards aligned.
Is it safe on slopes?
Only with a stable tractor, low speed and a seatbelt. Avoid steep grades.
Can it cut brush?
Only light brush. Use a brush hog or flail for heavier growth.