Farm Equipment Rentals
Harvesting Equipment Rentals

Tedder Rentals for Hay Drying

Rent a tedder to fluff and spread cut hay for faster drying: rotor types, timing, speed, leaf loss, tractor needs, safety and fitting tedding with raking and baling.

5 min read1,019 wordsUpdated November 2026
Tedder Rentals for Hay Drying: illustration of a combine unloading grain into a cart

A tedder fluffs and spreads freshly cut hay so air and sun reach more of it. It can cut drying time by a day or more in some conditions, which can be the difference between good hay and rained-on hay. Renting a tedder suits farms that need the speed for a few cuttings per season. This guide covers types, timing and use.

What tedders do

Cut hay lies in a swath that dries from the top. A tedder lifts and scatters the hay so more surface is exposed. It also breaks up wet clumps and helps even drying. Tedders are most useful with thick or heavy crops and in humid weather.

See hay rake rentals: wheel and rotary and renting a mower-conditioner for hay.

Types

  • Rotor tedders. Several rotors with tines spin and scatter hay. Common and efficient.
  • Fold-up tedders. Fold for transport and storage.
  • Three-point hitch tedders. Smaller, suited to compact and utility tractors.
  • Trailed tedders. Larger, for big fields.

Ask the number of rotors, working width and transport width.

Tedder Rentals for Hay Drying: illustration of a combine unloading grain into a cart
Illustration: a combine unloading grain into a cart. Original artwork for Farm Equipment Rentals.

When to ted

Tedding works best right after mowing for heavy crops, or once the top layer has wilted. The right timing depends on crop, weather and humidity. Tedding when hay is too dry can shatter leaves and lower quality. Check local guidance; see SARE publications and your state page.

Settings

  1. Tine height. Lift hay without hitting soil.
  2. Rotor speed. Follow the manual.
  3. Ground speed. Moderate, to avoid leaf loss.
  4. Rotor angle. Adjust for spread and lift.
  5. Working width. Match to your mower.

Check the first pass for evenness, and adjust.

Tractor needs

Tedders need PTO power and a suitable hitch. Check horsepower, hydraulics and weight. See utility tractor rentals: sizing guide and compact tractor rentals for small farms.

Fitting into the sequence

A typical sequence is mow, ted, rake and bale, but not every cutting needs every step. Tedding once may be enough for light crops. Heavy or humid conditions may call for two passes. Test moisture before baling. See renting a hay baler: round vs square.

Common mistakes to avoid

  • Tedding too dry. Leaf loss.
  • Tines too low. Soil contamination.
  • Going too fast.
  • Ignoring forecasts.
  • Skipping the walkaround.

Inspect before you accept

Check tines, rotors, gearboxes, bearings, PTO shaft, hitch, hydraulics and tires. Test the rotors. Photograph existing damage. See understanding rental equipment condition reports.

Safety

See the OSHA agricultural operations page.

Transport

Tedders fold for transport. Check lights, width and road rules. See DOT requirements for rented equipment transport.

Costs and terms

Ask about daily and weekly rates, delivery, deposit and wear charges. See how to budget for farm equipment rentals and understanding rental agreements.

Planning the drying window

Hay cut in the morning may be ready to ted by late morning, and raked later in the day. Plan labor and tractors so you do not leave hay wet overnight if rain is coming. Decide which fields come first, and reserve the tedder for the days you need it. Check the forecast every morning, and be ready to change plans.

Troubleshooting

If hay wraps on rotors, slow down or check tine condition. If hay is thrown unevenly, adjust rotor angle. If soil appears, raise the tines. If the tedder vibrates, stop and check for bent tines or loose parts.

Cleaning and return

Clear hay from rotors, grease fittings and wash off mud. See returning farm equipment: cleaning and fuel rules.

A sample job

A farm with 40 acres of heavy mixed hay rents a rotor tedder for two days. The farmer teds an hour after mowing, then again the next morning. Hay dries earlier than before, and rake and baler follow in the afternoon. The farm returns the tedder clean.

Questions to ask the dealer

  1. How many rotors and what width?
  2. What tractor do you recommend?
  3. What wear parts should I check?
  4. What are the return requirements?
  5. Can you provide settings guidance?

Keeping records

Record dates, fields, passes, weather and results. See record keeping for farm equipment rentals.

Tedding different crops

Heavy alfalfa and clover swaths hold moisture and benefit the most from tedding. Grass hay often dries quickly on its own, and tedding it may add little. Mixed stands fall between the two. Leafy crops lose leaves easily, so keep speed moderate and ted at moisture levels that keep leaves attached. Ask your extension office what moisture ranges suit your crop and region.

Working with the weather

Humidity, wind and sun set the pace. A breezy, sunny day dries hay faster than a still, humid one. If rain is forecast, decide early whether tedding will help or whether it is better to bale or wrap sooner. Avoid tedding after a rain shower unless the surface has dried, because wet hay clumps and wraps around the rotors. Keep notes on how each day's weather affected drying so your next cutting goes more smoothly.

Field and ground conditions

Walk the field before tedding and mark rocks, stumps, wet spots and holes. Tines catch on debris, and rotors can be damaged by a hidden rock. On uneven ground, run slower and keep the tines high enough to clear bumps. Avoid tedding right up against fences, trees and ditches where the machine could snag, and finish those edges by hand or with a smaller tool.

Bottom line

A tedder speeds drying when used at the right time and with careful settings. Rent one for heavy crops and humid weather, and coordinate with raking and baling.

Frequently asked questions

What does a tedder do?

It lifts and spreads cut hay so it dries faster.

When should I ted?

Soon after mowing for heavy crops, avoiding very dry hay.

Do tedders cause leaf loss?

They can if used too dry or too fast.

How many passes do I need?

It depends on crop and weather. One or two is common.

Keep reading

Harvesting Equipment Rentals

Hay Rake Rentals: Wheel and Rotary

Rent a wheel or rotary hay rake: windrow forming, merging, raking speed, leaf loss, tractor needs, ground conditions, setup, safety and a plan to keep hay moving to the baler.

Harvesting Equipment Rentals

Disc Mower Rentals for Pasture and Hay

Rent a disc mower for pasture and hay: cutting width, drum or disc design, blade care, stones, speed, tractor needs, cutting height, safety and return checks.

Harvesting Equipment Rentals

Renting a Mower-Conditioner for Hay

Rent a mower-conditioner for hay: disc or sickle cutterbars, roll or flail conditioning, cutting height, drying, tractor needs, daily service, safety and a plan to the baler.

Harvesting Equipment Rentals

Silage Bagger Rentals for Storage

Rent a silage bagger to store forage in plastic bags: bag sizes, loading, density, moisture, site prep, tractor needs, bag care, safety and costs versus bunkers.