Farm Equipment Rentals
Land Management and Specialty Equipment

Renting a Yield Monitor for Harvest Data

Rent a yield monitor for harvest data: sensors, GPS, moisture and flow calibration, mapping, cleaning data, using maps, privacy, installation on combines and costs.

5 min read1,030 wordsUpdated November 2026
Renting a Yield Monitor for Harvest Data: illustration of a skid steer clearing brush near a pond

Yield monitors measure grain flow, moisture and position while you harvest. The result is a map showing where fields produce well and where they lag. Renting a monitor gets you data without buying a system. This guide covers equipment, calibration and how to use the maps.

What it measures

  • Grain flow. A sensor measures mass or volume going into the tank.
  • Moisture. A sensor reads grain moisture.
  • Position. GPS records where grain came from.
  • Speed and header status. Helps correct for delays.

The system logs data points every second or so, then builds a map.

Types of monitors

  • Impact plate sensors. Common on combines.
  • Optical or paddle sensors. For some elevators.
  • Mass flow sensors. Measure weight directly.
  • Aftermarket kits. Fit various combine models.

Check compatibility with your combine and header. See SARE publications, USDA NRCS and your state page.

Renting a Yield Monitor for Harvest Data: illustration of a skid steer clearing brush near a pond
Illustration: a skid steer clearing brush near a pond. Original artwork for Farm Equipment Rentals.

Installation

Installers mount sensors in the clean grain elevator, add a moisture sensor, a header height switch, a speed sensor and GPS. Wiring runs to the display. Follow the manual closely. Check that everything works before harvest. Installation errors cause bad data.

Calibration

Calibration matches the monitor to scale weights. Harvest several loads at different flow rates, weigh them and enter the results. Recalibrate when changing crops or conditions. Check moisture calibration against a trusted tester. See renting a grain moisture tester for harvest.

Harvest practices

Keep header width and flow consistent. Raise the header at the ends and when turning so the monitor knows. Avoid stopping in the field when possible. Record field names, crop, hybrid and date. Note harvest events such as lodging or storms.

Cleaning the data

Raw data contains errors from turning, stops, delays and sensor noise. Remove or correct points at field edges, overlaps and delays. Check for GPS offsets. Use software to filter. Do not draw conclusions from uncleaned data.

Using yield maps

Yield maps show patterns. Compare with soil maps, elevation, drainage, fertilizer and planting data. Look for repeating patterns. Use them to test products and practices with on-farm trials. Ask your extension service for help. See Extension.

Data and privacy

Yield data is valuable. Ask the dealer who owns and can access it. Copy your files before returning the monitor and erase them. See precision ag rentals: data and privacy issues.

Common mistakes to avoid

  • Skipping calibration.
  • Bad moisture readings.
  • Mixing up field names.
  • Not cleaning data.
  • Losing files.

Inspect before you accept

Check sensors, cables, display, GPS and mounts. Test power. Photograph existing damage. See understanding rental equipment condition reports.

Safety

  • Shut down the combine and lock out before installing sensors. See the farm machinery lockout-tagout procedure template.
  • Use ladders carefully and keep three points of contact.
  • Keep cables clear of moving parts.
  • Avoid distractions in the cab.

See the OSHA agricultural operations page and CDC NIOSH agriculture.

Costs and terms

Ask about weekly and seasonal rates, installation fees, deposit and damage terms. See how to budget for farm equipment rentals and understanding rental agreements.

Planning the harvest

Install the monitor before harvest. Practice calibration steps. Plan loads for calibration. Keep a notebook for field notes. Plan how you will back up data each day.

Troubleshooting

If yields look too high or low, recheck calibration. If moisture jumps, clean the sensor. If GPS drops, check the antenna. If the display freezes, restart and check power. Contact the dealer when unsure.

From data to decisions

Use maps to plan fertility, seed placement, drainage fixes and hybrid selection. Look for a few simple actions, such as fixing a wet spot or adjusting lime. Share maps with your adviser. See renting a soil sampler for precision ag.

Cleaning and return

Wipe sensors, coil cables and return all parts. Erase data. See returning farm equipment: cleaning and fuel rules.

A sample job

A grower rents a yield monitor for a season to see how a new drainage system affects corn. The grower calibrates on several loads, cleans data and finds higher yields near tile. The monitor is returned and data erased.

Questions to ask the dealer

  1. What combines does it fit?
  2. Who installs and calibrates?
  3. Does it include moisture and GPS?
  4. How is data handled?
  5. What damage terms apply?

Keeping records

Record calibrations, field names and dates. See record keeping for farm equipment rentals.

Working with different crops

Corn, soybeans, wheat and other crops flow differently through the combine, so each needs its own calibration and settings. Moisture sensors respond to crop type, so choose the correct calibration curve in the display. For specialty crops, ask the dealer whether their monitor supports them and whether sample loads can be weighed accurately.

Typical sources of error

Time delays between the header and the sensor can shift data in the map. Delay settings should be checked and adjusted. Sloping ground, partial header widths and slow end rows can also distort numbers. Keep a note of unusual events so you know which parts of a map to trust.

Moisture and shrink

Yield maps usually report yield at standard moisture. Be sure the monitor's moisture reading is calibrated, because a small error changes the numbers across a whole field. Compare with elevator tickets to check overall accuracy, and adjust as needed.

Sharing results

Yield maps are useful in discussions with landlords, lenders and advisers. Share only what you want to, and keep original files safe. Ask what format the receiving software needs, and save an extra copy for your records.

Working with the dealer during harvest

Harvest is no time for a breakdown. Ask the dealer for a phone number for support, and find out how fast they respond. Keep a spare fuse, a printed quick-start guide and a USB stick for data. Test the system before the first field.

Bottom line

Yield monitors reveal field patterns when calibrated and cleaned. Protect your data and use maps to guide decisions.

Frequently asked questions

How often should I calibrate?

At start, for each crop and when conditions change.

Can I rent one for one season?

Often yes. Ask dealers.

Why do yields look odd?

Calibration, moisture or GPS errors are common causes.

Who owns the data?

You should, but read the agreement.

Keep reading

Land Management and Specialty Equipment

Renting a Section Control Kit for Sprayers

Rent a section control kit for sprayers: automatic boom section shutoff, GPS and controller setup, nozzle and valve checks, overlap savings, drift reduction and records.

Land Management and Specialty Equipment

Renting an Airblast Sprayer for Orchards

Rent an airblast sprayer for orchards and vineyards: PTO and engine units, fan and nozzle setup, tree row volume, calibration, drift control, PPE, cleanout, safety and costs.

Land Management and Specialty Equipment

Renting a Sprayer for Herbicide Application

Rent a sprayer for herbicide application: tank, pump and boom types, nozzle choice, calibration, labels, drift and buffers, applicator licensing, PPE, cleanout and costs.

Land Management and Specialty Equipment

Renting a Seed Treater for On-Farm Treatment

Rent a seed treater for on-farm seed treatment: batch and continuous units, slurry rates, labeled products, calibration, dust and PPE, storage and cleanup.