Grain that goes into storage too wet can spoil, heat, mold and lose value. A moisture tester gives a quick reading in the field or at the bin. Rentals are common during harvest, when one meter is not enough for several machines and locations. This guide covers meter types, sampling and results.
Types of testers
- Portable handheld meters. Quick, small samples.
- Benchtop meters. More accurate, larger samples.
- In-bin or cable probes. Monitor stored grain.
- Combine-mounted sensors. Continuous readings.
Handheld models may use a capacitance or resistance method. Choose one calibrated for your crop. See SARE publications, USDA NRCS and your state page.
Calibration and checking
Meters can drift. Ask the dealer whether the meter has been checked. Compare readings with an elevator or lab test. Use a reference sample if available. Record any offset, and track it over the season. Keep batteries fresh.
Sampling
Take a representative sample. Collect from several places in the truck, bin or wagon. Mix well. Remove trash and broken kernels as instructed. Fill the sample cup to the line. Test several samples and average the readings.
Temperature effects
Grain temperature changes the readings. Cold grain reads lower or higher depending on the meter. Many meters have temperature correction. Let samples come to room temperature if the instructions say so. Keep the meter out of direct sun and cold.
Crop-specific settings
Corn, soybeans, wheat, sorghum and other grains have different curves. Set the correct crop. Hybrids, damage and test weight can affect readings. Check the manual for special notes. See renting a yield monitor for harvest data.
Safe storage moisture
Safe levels vary with crop and storage length. Wet grain stored warm can spoil quickly. Ask your extension agent for recommended moisture for your crop and plan. See Extension. Dry grain in time, aerate bins and monitor temperature.
Using results for decisions
Test fields before harvest to plan start dates. Test loads to decide on drying. Test bins periodically during storage. Keep records. Compare with elevator discounts.
Common mistakes to avoid
- Unrepresentative samples.
- Wrong crop setting.
- Ignoring temperature.
- Not checking calibration.
- Storing grain too wet.
Inspect before you accept
Check the display, cup, sensors, cables and batteries. Test with a known sample. Photograph existing damage. See understanding rental equipment condition reports.
Safety
- Never enter a grain bin alone. Grain can trap and suffocate.
- Lock out augers and equipment. See the farm machinery lockout-tagout procedure template.
- Keep dust out of your lungs with a mask.
- Use ladders safely.
- Keep children away from grain and bins.
See the OSHA agricultural operations page and CDC NIOSH agriculture.
Costs and terms
Ask about daily and weekly rates, deposit and damage terms. See how to budget for farm equipment rentals and understanding rental agreements.
Planning the harvest
Reserve the meter before harvest. Test often. Train helpers. Keep a notebook for results. Plan drying capacity.
Troubleshooting
If readings jump, check sample and temperature. If readings differ from the elevator, check calibration. If the meter will not turn on, check batteries. If values drift, clean sensors. Contact the dealer when unsure.
Drying and aeration
If grain is wet, use dryers or aeration as appropriate. Do not overdry, which wastes fuel and loses weight. Watch bin temperature and check grain frequently. Keep records of dryer settings.
Cleaning and return
Wipe dust, empty the cup and return all accessories. See returning farm equipment: cleaning and fuel rules.
A sample job
A grower rents two handheld meters for harvest. The grower compares them with the elevator, samples each load and records results. The meters are returned clean.
Questions to ask the dealer
- What crops are calibrated?
- How accurate is it?
- Does it correct for temperature?
- What battery life?
- What damage terms apply?
Keeping records
Record load, field, date, moisture and temperature. See record keeping for farm equipment rentals.
Choosing between meters
A handheld meter is fast and convenient at the field edge, while a benchtop model with a larger sample cup usually gives steadier readings. If several people will test loads, rent identical meters so readings are comparable. Mixing different brands makes it hard to tell whether a difference is real or just meter variation.
Building a testing routine
Pick a fixed routine and stick to it. Draw a sample from each truckload at the same point, mix it in a clean bucket, take at least three readings, and record the average. Test the first loads from each field to learn how the crop is drying, then adjust how often you test as conditions change. During cool, damp stretches, moisture can swing quickly from morning to afternoon.
Reading the numbers
Moisture is only one input. Test weight, damage and foreign material affect price. Keep a log that pairs moisture with field, hybrid or variety, harvest date and weather. Over a season that log shows which fields dry down first and helps you schedule harvest order, so the combine runs where grain is ready.
When readings do not match the elevator
Small differences are normal, because the elevator may use a different meter and a different sample. If the gap is large, test the same sample on your meter several times, check batteries and temperature, and ask the elevator to run a retest. Keep notes so you can show the pattern to the dealer if the meter seems off.
Care in the field
Dust, moisture and shock hurt electronics. Keep the meter in a case between uses, wipe sensors with a dry cloth, and never leave it on a hot dashboard. Carry spare batteries and a reference sample. Return the meter with all cups, brushes and manuals.
Grain bin entry reminder
Never walk on grain to break up crust or clear a bridge. Moving grain can bury a person in seconds. Use lockout, a harness and lifeline, a trained observer and proper air testing when entry cannot be avoided. Plan work so entry is rare.
Bottom line
A good moisture tester protects grain value when you sample well, calibrate and record. Never enter bins alone.
Frequently asked questions
How accurate are handheld meters?
Good enough for decisions, but check against the elevator.
Does temperature matter?
Yes. Follow the instructions.
What moisture is safe?
It depends on crop and storage length. Ask extension.
Can I use one meter for all grains?
Only if it has the right calibrations.