Section control uses GPS and electric valves to turn boom sections on and off automatically. It prevents double application at headlands, point rows and around waterways. Renting a kit lets you try it on your sprayer before you commit. This guide covers equipment, setup and testing.
What it does
A controller tracks where the sprayer has been and what area is already covered. When a boom section enters a covered zone or a no-spray area, the system shuts that section off. When it exits, it turns back on. This reduces overlap and skips and saves product.
Compare with renting a boom sprayer for field crops and renting a gps guidance system for field work.
Components
- GPS receiver.
- Display and controller.
- Electric section valves.
- Flow meter and pressure sensor.
- Wiring harness.
- Optional automatic rate control.
Check that kit parts match your sprayer plumbing and boom. See SARE publications, USDA NRCS and your state page.
Compatibility
Ask whether the kit fits your sprayer type and boom width, how many sections it controls and whether nozzles are compatible. Some systems control individual nozzles. Check electrical requirements and mounting locations.
Setting up
- Install valves and flow sensors per the manual.
- Mount GPS with a clear sky view.
- Enter boom width, section widths and offsets carefully.
- Set nozzle spacing and type.
- Calibrate flow and pressure.
- Create field boundaries and no-spray areas.
- Test with water.
Offsets are critical. A small error produces skips or double coverage.
Latency and timing
Valves take time to open and close, and the spray takes time to leave the nozzle. Set delays so that coverage begins and ends at the right spot. Test at your normal speed. Adjust until edges line up.
Drift and nozzle choice
Section control does not stop drift. Choose nozzles and pressures that give the droplet size required by the label. Avoid spraying in strong wind or inversions. Keep buffers near sensitive crops, water and homes. See the EPA pesticides page.
Common mistakes to avoid
- Wrong offsets.
- Untested latency.
- Poor GPS placement.
- Leaking valves.
- No records.
Inspect before you accept
Check valves, wiring, controller, sensors and connectors. Run a water test. Photograph existing damage. See understanding rental equipment condition reports.
Safety
- Shut off and relieve pressure before work.
- Wear gloves, eye protection and other gear as labeled.
- Lock out before service. See the farm machinery lockout-tagout procedure template.
- Keep cables away from moving parts.
- Do not rely on the display while driving near hazards.
See the OSHA agricultural operations page and CDC NIOSH agriculture.
Costs and terms
Ask about weekly and seasonal rates, installation, deposit and damage terms. See how to budget for farm equipment rentals and understanding rental agreements.
Estimating savings
Compare overlap with and without section control. Odd-shaped fields, many waterways and point rows show bigger savings. Estimate acres saved and multiply by product cost. If savings are small, the rental may not pay.
Planning the season
Install and test early. Map fields and no-spray zones. Train operators. Carry a printed quick guide. Keep spare fuses and fittings.
Troubleshooting
If sections do not shut off, check boundaries and GPS. If skips appear, adjust latency. If valves stick, clean or replace them. If flow readings are off, recalibrate. Contact the dealer when unsure.
Data and records
Section control creates as-applied maps. Save them with product, rate and date. They help with records and disputes. See precision ag rentals: data and privacy issues.
Cleaning and return
Rinse sprayer and valves with clean water, dispose of rinse water per label, then return. See returning farm equipment: cleaning and fuel rules.
A sample job
A farmer with many waterways rents a section control kit for spring herbicide. After a water test, the farmer fine-tunes delays and saves product at headlands. The kit is cleaned and returned.
Questions to ask the dealer
- What sprayers does it fit?
- How many sections?
- Who installs it?
- How is data handled?
- What damage terms apply?
Keeping records
Record settings, tests and as-applied files. See record keeping for farm equipment rentals.
Nozzle and boom maintenance
A section control system is only as good as the nozzles and boom behind it. Replace worn nozzles, check spray patterns and make sure the boom height is correct. Clean screens and strainers. Uneven wear causes uneven application no matter how smart the controller is.
Rate control and flow
Some kits include automatic rate control, which adjusts pressure or flow as speed changes. Make sure the pump and plumbing can support it, and avoid pressures that create fine drift-prone droplets. Calibrate speed sensors and flow meters with water, and keep calibration numbers on record.
Training and handoffs
If several people run the sprayer, make sure each one knows how to start, pause and override the system. Write simple steps on a card in the cab. Practice with water in an open area so mistakes do not cost product.
Field mapping and no-spray zones
Create no-spray areas around wells, water, houses and sensitive crops. Check that the boundaries are correctly saved before each job. Walk or drive the borders if the field changed since last year, such as a new waterway or pond.
Weather and spray windows
Section control does not give you a spray window, weather does. Check wind speed and direction, temperature and humidity before starting, and keep notes. Stop if wind picks up or an inversion develops. Keep records of conditions in the as-applied file.
What to do at the end of a job
Save the as-applied map, record total acres and product used, and compare with your plan. Check for skips or overlaps in the map, and adjust settings for the next field. Back up the data before returning the kit.
Bottom line
Section control saves product when offsets and delays are right. Test with water, watch drift and keep records.
Frequently asked questions
Will it save money?
In odd-shaped fields, often yes. Estimate before renting.
Does it prevent drift?
No. Choose nozzles and weather carefully.
How do I test it?
Use water and check coverage at edges.
Can I use it on any sprayer?
Compatibility varies. Ask the dealer.