Farm Equipment Rentals
Land Management and Specialty Equipment

Renting a Sprayer for Herbicide Application

Rent a sprayer for herbicide application: tank, pump and boom types, nozzle choice, calibration, labels, drift and buffers, applicator licensing, PPE, cleanout and costs.

5 min read1,075 wordsUpdated November 2026
Renting a Sprayer for Herbicide Application: illustration of a skid steer clearing brush near a pond

Herbicides control weeds when applied right and cause trouble when applied wrong. A rented sprayer gives you the capacity to treat fields, pastures or fence rows when your own equipment is not available. This guide covers choosing, calibrating and using a sprayer safely, with an eye on labels and law.

Sprayer types

  • Backpack and handheld sprayers. Spot work.
  • ATV and UTV sprayers. Pastures and small fields.
  • Three-point or trailed sprayers. Mid-size acreage.
  • Self-propelled sprayers. Large acreage.
  • Hand-gun skid sprayers. Fence rows and brush.

Compare with renting a boom sprayer for field crops.

Rules, labels and licensing

Pesticide labels state crops, rates, timing, weather limits, buffers and protective equipment. Some products are restricted-use and require a licensed applicator. Rules vary by state. Check the product label, your state agriculture department and the EPA pesticides page. Keep application records. If you are unsure, ask a licensed applicator.

Renting a Sprayer for Herbicide Application: illustration of a skid steer clearing brush near a pond
Illustration: a skid steer clearing brush near a pond. Original artwork for Farm Equipment Rentals.

Choosing size and pump

Match tank size to acreage and refill logistics. Choose a pump that gives steady pressure at your target rate. Agitation keeps chemicals mixed. Check hose condition and screens. See SARE publications, USDA NRCS and your state page.

Nozzles and droplet size

Nozzle type sets droplet size and pattern. Larger droplets reduce drift, and smaller droplets give better coverage for some products. Labels often specify the droplet size class. Choose nozzles to match. Replace worn nozzles, because they spray too much and unevenly.

Calibration

  1. Fill the tank with clean water.
  2. Measure nozzle output for one minute and compare across the boom.
  3. Measure travel speed over a known distance.
  4. Compute gallons per acre.
  5. Adjust pressure or speed to hit your target rate.
  6. Record your numbers.

Calibrate each time you change nozzles, speed or pressure.

Drift and weather

Spray when wind is within label limits, usually light and steady. Avoid temperature inversions, high heat and gusty wind. Keep boom height low. Keep buffers near water, homes, gardens, bees and sensitive crops. Never spray if rain is imminent and the label says not to.

Mixing and loading

Mix on level ground away from wells and water. Follow the label's mixing order. Use closed systems or protective gear. Do not leave sprayers unattended while filling. Keep spill kits and clean water for emergencies. Dispose of containers per the label.

Protective equipment

Wear the protective equipment listed on the label, which may include chemical-resistant gloves, coveralls, goggles and a respirator. Wash after handling. Keep clean clothes separate. Know the symptoms of exposure and have the poison control number handy.

Common mistakes to avoid

  • Ignoring the label.
  • Skipping calibration.
  • Spraying in wind.
  • Poor cleanout.
  • No records.

Inspect before you accept

Check the tank, pump, hoses, boom, nozzles, screens and shutoff valves. Test with water. Photograph existing damage. See understanding rental equipment condition reports.

Safety

See the OSHA agricultural operations page and CDC NIOSH agriculture.

Transport

Sprayers can be wide and tall. See the equipment transport tie-down checklist and DOT requirements for rented equipment transport.

Costs and terms

Ask about daily and weekly rates, cleaning fees, delivery and deposit. Some dealers charge extra if chemical residue remains. See how to budget for farm equipment rentals and understanding rental agreements.

Planning the job

Scout weeds, pick products and timing, and check the forecast. Order chemicals and plan refill water. Mark sensitive areas. Notify neighbors if needed. Plan equipment time carefully, since weeds have a best treatment window.

Troubleshooting

If the spray pattern is uneven, check nozzles and pressure. If pressure drops, check screens and the pump. If streaks appear, check boom height and overlap. If foaming occurs, use label-approved antifoam. Contact the dealer when unsure.

Cleanout

Cleaning removes residue that could damage the next crop. Rinse the tank, flush lines and nozzles and use a label-approved cleaner. Triple-rinse and apply rinsate on the treated field, if allowed. Do not drain near wells or water. Tell the dealer what products you used. See returning farm equipment: cleaning and fuel rules.

A sample job

A rancher rents a three-point sprayer to treat a pasture. The rancher calibrates with water, checks wind, sprays during a calm morning and triple-rinses afterward. The records and sprayer go back clean.

Questions to ask the dealer

  1. What tank size, pump and boom width?
  2. What nozzles are installed?
  3. What cleanout is required?
  4. What chemicals were used before?
  5. What damage terms apply?

Insurance and liability

Spray drift and crop injury claims can be costly. Ask your insurer about coverage and keep records. Talk to neighbors in advance.

Keeping records

Record product, rate, date, weather, location and applicator. See record keeping for farm equipment rentals.

Weed biology and timing

Herbicides work best when weeds are small and actively growing. Identify the weeds and their growth stage before choosing a product. Some products work only before weeds emerge, while others need leaves to absorb them. Ask your extension agent for weed identification and herbicide programs for your crop. Resistance can develop when the same mode of action is used repeatedly, so rotate products.

Pastures and fence rows

On pastures, check grazing and haying restrictions after spraying. Some herbicides injure clover or sensitive trees, and others carry long residual effects in manure and hay. Keep sprays off desirable trees and shrubs. Read the label about moving livestock and using manure or hay from treated areas.

Water source and mixing quality

Hard or dirty water can reduce herbicide performance. Use clean water, and check pH and hardness if the label calls for it. Add products in the correct order. A small jar test can catch incompatibility before you load the tank.

Spill and emergency response

Keep spill supplies such as absorbent, a shovel and bags on the sprayer. Know the first aid steps on the label, and keep the poison control number visible. If a spill reaches water, contact the appropriate agency right away.

Bottom line

A rented sprayer works well when labels, calibration and weather are respected. Protect people, neighbors and your next crop.

Frequently asked questions

Do I need a license?

For restricted-use products, yes. Check your state.

How do I calibrate?

Measure nozzle output, speed and compute gallons per acre.

Can I spray in wind?

Only within label limits, and avoid strong wind.

How do I clean the tank?

Triple-rinse and use label-approved cleaner.

Keep reading

Land Management and Specialty Equipment

Renting an Airblast Sprayer for Orchards

Rent an airblast sprayer for orchards and vineyards: PTO and engine units, fan and nozzle setup, tree row volume, calibration, drift control, PPE, cleanout, safety and costs.

Land Management and Specialty Equipment

Renting a Mist Blower for Orchard Spraying

Rent a mist blower for small orchards, nurseries and vineyards: backpack and cart units, tanks, nozzles, concentrate spraying, calibration, drift limits, PPE and cleaning.

Land Management and Specialty Equipment

Renting an Aerial Sprayer Drone for Applications

Rent or hire an aerial sprayer drone: tank size, nozzles, flight planning, drift control, pesticide labels, certification, FAA rules, safety, insurance and costs.

Land Management and Specialty Equipment

Renting a Boom Sprayer for Field Crops

Rent a boom sprayer for field crops: boom width and height, tank size, nozzle spacing, rate controllers, GPS, drift management, calibration, cleanout, safety and costs.