A forage harvester chops whole plants into pieces for silage, which ferments in a pile, bunker, bag or silo. It is the fastest way to put up corn silage and haylage, and renting one gives smaller operations access to a high-capacity machine. Success depends on the whole system, not just the harvester. This guide covers machine choices, settings and crew planning.
What forage harvesters do
A header cuts the crop, rollers feed it into a cutterhead that chops it to a set length, and a kernel processor cracks corn kernels. A spout blows the chopped crop into a truck or wagon that runs alongside. Self-propelled harvesters are common for large jobs, and pull-type harvesters use tractors on smaller farms.
Related: renting a forage wagon for silage transport, silage bagger rentals for storage and renting a bagger for silage and grain.
Headers
- Corn head. Row or rotary types, matched to row spacing.
- Grass or hay pickup head. Picks up windrows.
- Direct-cut head. Cuts standing crops.
Ask which heads are available and their condition. See corn combine rentals: headers and settings for corn row considerations.
Chop length and processing
Chop length affects rumen function and packing. Too long packs poorly, and too short can reduce fiber value. Kernel processing breaks kernels so animals digest the starch. Settings depend on crop, moisture and your ration, so ask your nutritionist or extension office. See SARE publications and your state page.
Moisture and timing
Corn silage is harvested at a moisture level that supports good fermentation, and haylage is wilted to a target moisture. Harvesting too wet leads to seepage and poor fermentation, and too dry packs poorly and spoils. Sample the field and check forecasts. Start when the crop is ready and the crew is ready.
The crew and logistics
Silage harvest has several moving parts:
- Harvester operator.
- Truck or wagon drivers. Enough to keep the harvester moving.
- Packer operator. A heavy tractor packs the pile or bunker.
- Bagger or silo operator.
- Ground help. Covering, sealing and safety.
See renting a forage wagon for silage transport and four-wheel-drive tractor rentals for heavy work. Hire or arrange labor early.
Packing and covering
Pack silage in thin layers with a heavy tractor, and drive back and forth to remove air. Cover the pile promptly with plastic, and weigh down the edges. Oxygen is the enemy, so speed and care matter. A slow pack or late cover can cost more than the rental.
Common mistakes to avoid
- Chopping too dry or too wet.
- Too few trucks.
- Packing in thick layers.
- Delaying cover.
- Skipping safety briefings.
Inspect before you accept
Check the cutterhead, knives, shear bar, kernel processor, feed rolls, spout, header, belts, tires and hydraulics. Test the knife sharpener if equipped. Photograph existing damage. See understanding rental equipment condition reports.
Safety
- Lock out before servicing or clearing plugs. See the farm machinery lockout-tagout procedure template.
- Keep bystanders away from the spout and header.
- Never climb onto the pile while it is moving.
- Beware of silo gas and bunker walls.
- Watch for power lines and slopes.
- Use seatbelts. See the tractor rollover prevention checklist.
See the OSHA agricultural operations page and CDC NIOSH agriculture.
Transport
Forage harvesters are large. Check width, weight and permits. See DOT requirements for rented equipment transport and oversize load permits for rented equipment.
Costs and terms
Ask about daily and weekly rates, header charges, knife sharpening, fuel, delivery and weather delays. See how to budget for farm equipment rentals and understanding rental agreements. Compare with custom chopping using the rental vs custom hire calculator.
Planning the harvest
Set a start date from crop moisture and weather. Confirm trucks, packer, labor and cover. Prepare the bunker or pad, with clean walls and drainage. Fuel the machines and carry spare knives and belts. Brief the crew on signals and positions. Keep a first aid kit and fire extinguishers. Set a plan for stoppages and rain.
Troubleshooting
If chop length varies, check knives and shear bar. If kernels are whole, adjust the processor. If the harvester plugs, slow down and check the feed. If trucks wait, add trucks or reroute. If the pile is loose, add packing time.
Cleaning and return
Clean crop from the machine, grease fittings and sharpen or replace knives as the agreement requires. See returning farm equipment: cleaning and fuel rules.
A sample harvest
A dairy farm rents a self-propelled harvester with a corn head for two days. Four trucks shuttle chopped corn to a bunker, and a heavy tractor packs in thin layers. The crew covers the pile that evening. Fermentation starts well, and the farm cleans and returns the machine on time.
Questions to ask the dealer
- Which heads and processors are available?
- What chop lengths can I set?
- Who sharpens knives and replaces wear parts?
- What are the fuel and return requirements?
- Do you offer operator support?
Keeping records
Record dates, fields, moisture, chop length, tons and storage location. See record keeping for farm equipment rentals.
Preparing the storage
The harvester is only half the system. Prepare the bunker, pile pad or bags before the first load arrives. Clean the floor and walls, fix cracks, check drainage and have plastic, tires or bags and sidewall covers ready. For bunkers, plan the packing direction and the face. For piles, choose a firm, well-drained pad with a slight slope away from the feed area. Have a plan for effluent, since wet silage releases liquid that must not reach streams or wells. Check your state page and the USDA NRCS for guidance on runoff management.
Working with a nutritionist
Silage quality shapes the whole ration. Talk with your nutritionist before harvest about target moisture, chop length and kernel processing score for your animals. Take samples during harvest and send them to a lab for analysis. Keep notes on fields, hybrids and harvest dates so you can match results to practices. Good records turn each harvest into a lesson for the next.
Bottom line
Silage harvest is a team effort. Rent a harvester with the right head, set chop length and processing, pack well and plan the crew and trucks before the window opens.
Frequently asked questions
What chop length should I use?
It depends on the crop and ration. Ask your nutritionist or extension office.
Why process kernels?
To crack them so animals digest the starch.
How many trucks do I need?
Enough to keep the harvester moving. It depends on distance and capacity.
Why does packing matter?
Tight packing removes air and supports good fermentation.