Stumps in a pasture or hay field are more than an eyesore. They damage mowers, catch implements and make fencing difficult. Pulling a stump with an excavator takes a big hole and a lot of work, while a stump grinder reduces it to chips in place. For farm use, you can rent walk-behind, tractor-mounted and skid-steer grinders. This guide explains how they work, how to choose, how to do the job safely and what to do afterward.
How stump grinders work
A stump grinder has a rotating cutting wheel with carbide teeth. The operator swings the wheel across the stump, grinding it a few inches at a time and moving down until the stump is below ground level. Chips fall around the site, and the roots near the stump may also be ground. Most stumps are ground to about six to twelve inches below ground, though depth varies by model and need.
Types:
- Walk-behind or self-propelled grinders. Gas-powered, often with tracks or wheels, good for yards and small stumps.
- Tractor-mounted grinders. Use the PTO and three-point hitch, suited to farm fields and larger stumps.
- Skid-steer attachments. Use hydraulic power and the skid steer's maneuvering. See renting a skid steer.
- Excavator attachments. Less common for farm rental.
- Trailer-mounted grinders. Large, towed units for heavy work.
Choosing the right machine
Consider:
- Stump size and species. Hardwoods are denser and slower to grind.
- Number of stumps. Many stumps favor a larger machine, while a few favor a small one.
- Access and terrain. Hills, soft ground and tight spaces limit options.
- Tractor or loader availability. If you have one, an attachment may be cheaper.
- Cutting depth and width. Match to your needs.
- Transport. Walk-behinds fit on small trailers, while others require larger hauling.
- Operator experience. Start with a simpler machine if you are new.
Ask the dealer to recommend a machine based on stump diameter and number.
Alternatives to grinding
| Method | Pros | Cons |
|---|---|---|
| Stump grinding | Fast, minimal soil disturbance | Chips left, roots remain |
| Excavator removal | Removes the stump and roots | Big holes, soil disturbance |
| Forestry mulcher | Clears brush and small trees in one pass | Not ideal for large stumps |
| Burning or chemical | Low equipment cost | Slow, regulated and may be unsafe |
| Leave and mow around | No cost | Hazards remain |
See renting a forestry mulcher, excavator rentals for farm drainage and digging and bulldozer rentals for land clearing.
Plan the job
- Call 811. Roots, utilities and lines may be near the surface.
- Walk the site. Look for rocks, wire, fence staples and metal in or near stumps, which can damage teeth and cause hazards.
- Mark stumps and hazards.
- Clear debris. Remove rocks and loose material around the stump.
- Decide how deep to grind. Deeper for planting trees, shallower for pasture.
- Plan for chips. They can be left, spread, raked into a pile or removed.
- Plan restoration. Fill holes, level the area and seed.
Check local rules for burning, disposal and clearing near streams and wetlands. See your state page.
Operating safely
Stump grinders throw chips, stones and debris at high speed, and the cutting wheel is dangerous.
- Wear safety glasses or face shield, hearing protection, boots, gloves and long pants.
- Keep bystanders at least the recommended distance away. Debris can travel far.
- Never grind with the guard removed.
- Keep your hands and feet away from the cutter wheel.
- Do not use on rocks, metal or concrete.
- Start the wheel above the stump and move across slowly.
- Shut off before clearing jams or inspecting.
- Keep a stable stance, and be careful on slopes.
- Use the emergency stop if something goes wrong.
- Do not leave the machine running unattended.
Follow the farm machinery lockout-tagout procedure template, the PTO safety shield inspection form for tractor models and the OSHA agricultural operations page.
Roots, chips and the finished site
Grinding the stump does not remove all the roots. Large roots remain and decay over time. Chips left in the hole mix with soil, and fresh wood chips can tie up nitrogen temporarily. If you plan to plant crops or seed pasture, you may remove chips or spread them thinly and amend soil as needed. Fill the hole with soil, firm it and seed. For tree planting, avoid planting directly over a fresh stump hole. Ask your local extension office for advice. See the resources on your state page.
Chips and brush
Large stump jobs generate a lot of chips. Options include:
- Spreading them as mulch around trees and gardens.
- Composting them.
- Using them in animal bedding where appropriate, avoiding walnut and other harmful species for horses.
- Hauling them away.
- Burning only where permitted.
See chipper and shredder rentals for farm waste for related equipment.
Costs and terms
Ask about:
- Half-day, daily, weekly and monthly rates.
- Tooth replacement and wear charges.
- Fuel and cleaning.
- Delivery and pickup.
- Damage waiver and deductible.
- Deposit.
- Training and safety instruction.
See understanding rental agreements and how to budget for farm equipment rentals. Compare with a contractor for large or numerous stumps.
Inspect before you accept
Check the cutting teeth, wheel, guards, belts, hydraulic lines, tracks or wheels and controls. Look for loose or missing teeth and oil leaks. Record hours and photograph the machine. See understanding rental equipment condition reports.
Bottom line
Stump grinders are a practical way to clear pastures and fence lines. Choose the right type for the stumps and terrain, inspect the site for hazards, wear protective gear, keep everyone back and plan for chips and re-seeding. For many large stumps, compare rental with hiring a contractor.
Frequently asked questions
How deep does a stump grinder go?
Typically several inches to a foot or more below ground, depending on the machine. Ask the dealer about the model you will rent.
Will grinding remove the roots?
It removes the stump and some nearby roots, but larger roots remain and decay over time.
Can I plant right after grinding a stump?
Fresh chips can affect soil and nitrogen. Remove or amend them and ask your extension office for advice.
How far do chips fly?
Chips and debris can travel far, so keep bystanders well back and follow the manufacturer's safety distance.