Farm Equipment Rentals
Tractors and Power Equipment Rentals

Chipper and Shredder Rentals for Farm Waste

Rent a wood chipper or shredder to handle brush, prunings, storm debris and crop waste on the farm: capacity, feed types, PTO models, safety, mulch uses and disposal rules.

5 min read1,129 wordsUpdated November 2026
Chipper and Shredder Rentals for Farm Waste: illustration of a utility tractor with a front loader in a farmyard

Orchard prunings, storm limbs, fence-line brush and old hedgerows pile up fast on a farm. Burning them is often restricted, hauling them is costly and they can harbor pests if left in heaps. A chipper or shredder turns the pile into mulch or compost material and shrinks the volume dramatically. Both are common rentals, and both can cause serious injuries if misused. This guide explains the machines, how to choose and how to run a safe job.

Chippers versus shredders

  • Wood chippers. Use rotating blades or knives to cut limbs and brush into chips. They handle woody material up to a rated diameter.
  • Drum and disc chippers. Two common designs. Drum chippers feed more aggressively, while disc chippers can be more forgiving.
  • Shredders and chipper-shredders. Use hammers or flails to shred leaves, vegetation, vines and light brush into finer material.
  • Tub grinders and horizontal grinders. Large machines that process big volumes of brush, pallets and stumps, usually delivered and operated by professionals.

Chippers suit limbs and trunks, while shredders suit garden waste, corn stalks and vines. Some units combine both functions.

Choosing the right machine

  1. Material and diameter. Check the maximum diameter the machine can accept, and choose with margin.
  2. Volume. A small job needs a small machine, while major cleanup may require a big chipper.
  3. Power source. Gas or diesel engine, or tractor PTO. PTO chippers use your tractor and are common on farms.
  4. Feed system. Gravity-fed, self-feeding or hydraulic feed rollers.
  5. Discharge. Chip chute direction and ability to blow chips into a truck or pile.
  6. Transport. Towable chippers need a hitch and lights, while PTO chippers are mounted or towed.
  7. Safety features. Feed control bars, emergency stops and hopper design.

Ask the dealer to recommend a machine for your brush size and volume. See tractor rental attachments and renting a tractor: what to know before you book for PTO compatibility.

Chipper and Shredder Rentals for Farm Waste: illustration of a utility tractor with a front loader in a farmyard
Illustration: a utility tractor with a front loader in a farmyard. Original artwork for Farm Equipment Rentals.

Typical farm jobs

Safety first

A chipper can pull a person into its blades in a fraction of a second. Safety rules matter:

  1. Read the manual and get a demonstration. Learn the stop controls before you start.
  2. Wear proper PPE. Eye protection, hearing protection, a hard hat or face shield, gloves without loose cuffs, snug clothing and sturdy boots.
  3. Do not wear loose clothing, jewelry or dangling items.
  4. Feed butt-end first or as directed, and let the machine pull material in.
  5. Never reach into the hopper or chute while running.
  6. Never stand directly in front of the feed path and step aside once the material enters.
  7. Do not clear jams while the engine or PTO is running. Shut down, wait for blades to stop and disconnect power.
  8. Keep bystanders, children and animals well away.
  9. Keep the work area clear of trip hazards and stack material neatly.
  10. Do not feed metal, rocks, wire or dirty material. It can damage blades and cause projectiles.

Review the PTO safety shield inspection form, the farm machinery lockout-tagout procedure template and the OSHA agricultural operations page. For a team job, use clear communication such as the hand signal guide for farm equipment.

Plan the job

  • Sort the material. Remove wire, metal, rocks and treated lumber. Separate diseased wood if you must manage it.
  • Stage the pile. Stack brush with butt ends facing the chipper.
  • Choose a site. Firm, level ground with room for the machine and chip pile.
  • Plan chip use. Mulch, compost, paths, bedding or removal.
  • Check regulations. Disposal of diseased wood, invasive species and burn rules vary. Ask your extension or state agriculture agency; see your state page.
  • Plan staff. At least two people for safety on larger jobs.

Using the chips

Wood chips are useful:

  • Mulch for orchards and gardens. Suppresses weeds and holds moisture.
  • Compost feedstock. Provides carbon.
  • Animal bedding. Use only suitable species and sizes.
  • Pathways and play areas.
  • Erosion control. Spread on bare areas.

Avoid chips from black walnut near horses, and avoid diseased or treated wood where it could cause problems. Fresh chips can tie up nitrogen in soil, so use them as surface mulch rather than tilling them in heavily. See hay mulch spreader rentals and renting a straw blower for mulching for spreading mulch.

Costs and terms

Ask about:

  • Daily and weekly rates, with hour limits.
  • Fuel and cleaning.
  • Blade sharpening or replacement charges.
  • Delivery and pickup.
  • Tractor requirements for PTO models.
  • Damage waiver and deductible.
  • Deposit.

See how to budget for farm equipment rentals and understanding rental agreements.

Inspect before you accept

Check blades, anvils, hopper, feed controls, safety stops, discharge chute, hitch, lights, tires and engine. Make sure all guards are in place. Record hours and photograph existing damage. See understanding rental equipment condition reports.

A sample cleanup day

Picture an orchard owner with several winter-pruned rows and a pile of storm limbs. The day starts with sorting: wire and stakes come out, and limbs are stacked with butt ends toward the chipper. A PTO chipper is hooked to a utility tractor on firm ground, and the discharge is aimed at a trailer so chips can be hauled to the orchard floor. One person feeds while another stays at a safe distance with the emergency stop in view. The team takes a break each hour to clear the chute area and check blade condition. By afternoon the piles are gone, and the chips go on as mulch around young trees.

Common mistakes

  • Feeding dirty brush that dulls blades in minutes.
  • Wearing loose gloves or sleeves near the hopper.
  • Forgetting to check wind direction before aiming the chute.
  • Trying to clear a jam with the machine still running.

Bottom line

A chipper or shredder is an efficient way to turn farm waste into a resource. Choose by material and volume, wear protective gear, never reach into the feed path, stop completely before clearing jams and plan how you will use or dispose of the chips.

Frequently asked questions

What size chipper do I need?

Choose one rated for your largest limb diameter, with some margin. Ask the dealer to match the machine to your brush.

Can I chip wood with nails or wire in it?

No. Metal can damage blades and create dangerous projectiles. Remove it first.

Are chippers dangerous?

Yes. They can pull in clothing and limbs quickly. Use PPE, follow the manual and never reach into the feed path.

What can I do with the chips?

Use them as mulch, compost material, pathways or erosion control, and avoid unsuitable species for livestock bedding.

Keep reading

Tractors and Power Equipment Rentals

Pressure Washer Rentals for Equipment Cleaning

Rent a pressure washer to clean tractors, trailers and barns: PSI and GPM, hot versus cold water, nozzles, detergents, runoff rules and how to protect seals and paint.

Tractors and Power Equipment Rentals

Wheel Loader Rentals for Farm and Ranch

When a wheel loader makes sense on a farm or ranch: bucket sizes, tipping loads, tires, articulated steering, feed and grain handling, transport, costs and safe operation.

Tractors and Power Equipment Rentals

Compact Tractor Rentals for Small Farms

Renting a compact tractor for small farms and homesteads: sizes, loaders, implements, tire choices, tow requirements, costs and safety on slopes and wet ground.