When a skid steer cannot reach the top of a hay stack or a loader cannot clear the side of a grain trailer, a telehandler can. A telescopic handler, or telehandler, has a boom that extends forward and upward, which lets it lift loads to considerable heights and place them at a distance. On farms, it is used for stacking bales, loading trucks, handling pallets, moving feed and construction work. This guide explains what to know before you rent one.
What a telehandler is
A telehandler is a wheeled, usually four-wheel-drive machine with a telescoping boom and a carriage that carries forks or other attachments. Variants include:
- Compact telehandlers. Smaller, maneuverable and suited to barns and tight yards.
- Rough-terrain telehandlers. Larger, with big tires and stabilizers for uneven ground.
- Agricultural models. Designed for farm duties, with attachments for bales and bulk material.
- Rotating telehandlers. Boom rotates for placement in more directions.
Compared with a skid steer, a telehandler lifts higher and farther but has less digging power and often a larger turning radius. Compared with a forklift, it handles rough ground and reaches over obstacles. See telehandler vs forklift rental comparison and renting a forklift for hay and feed handling.
Common farm uses
- Stacking round and square bales high in barns or stacks.
- Loading and unloading hay trucks and trailers.
- Moving pallets of feed, seed and fertilizer.
- Filling bins and hoppers.
- Handling bulk bags and totes.
- Loading manure into spreaders or trucks with a bucket.
- Working on building and roofing projects.
- Moving large equipment components in shops.
Understanding the load chart
The most important document on a telehandler is the load chart, which shows how much weight the machine can lift at each boom angle and extension. Key points:
- Capacity falls as the boom extends. A machine rated for several thousand pounds at close range may lift far less at full reach.
- Capacity falls as height rises. Lifting high with a long reach is the most demanding.
- Stabilizers change capacity. Some models require stabilizers for certain lifts.
- Attachments change capacity. Forks, buckets and grapples have different weights and centers of gravity.
- Ground and tires matter. Soft or sloped ground reduces stability.
Ask the dealer to show you the chart and explain how to read it. Know the weight of your loads. A large round bale can weigh well over a thousand pounds.
Attachments
- Pallet forks. Standard for pallets and bagged material.
- Bale spear or bale clamp. For round and square bales.
- Bucket. For grain, soil, manure and other bulk.
- Grapple. For brush and bundles.
- Lifting hook or jib. For slings and certain loads.
- Work platform. Only when approved, equipped and operated per rules.
See renting a bale grapple for handling and tractor rental attachments.
Choosing the right machine
Consider:
- Maximum lift capacity and height. Pick for your heaviest load and highest stack.
- Forward reach. Needed for loading across trailers and over obstacles.
- Width and turning radius. For barns and gates.
- Tires and traction. For mud and rough ground.
- Cab and visibility. For long days and safety.
- Transport weight. Telehandlers can weigh several tons.
Ask the dealer whether you can try the machine with your actual loads, and bring a representative bale or pallet if you can.
Safe operation
Telehandlers have a risk of tipping forward and losing stability, especially with extended loads on slopes. Follow these rules:
- Get trained. Do not operate without instruction and understanding of the load chart.
- Wear the seatbelt. Keep your body inside the cab.
- Check the load chart before each lift. Do not exceed ratings.
- Keep loads low while traveling. Tilt the forks back slightly and travel with the boom retracted.
- Operate on firm, level ground. Use stabilizers when required.
- Never lift people unless using an approved platform with proper procedures.
- Watch overhead lines. Maintain safe distances.
- Keep bystanders away. Use a spotter when visibility is limited.
- Do not use the telehandler to push or pull. It is not designed for dragging loads.
- Park safely. Lower the boom, set the brake and remove the key.
See the OSHA agricultural operations page, the hand signal guide for farm equipment and the farm machinery lockout-tagout procedure template.
Rental terms and costs
Telehandlers are heavier equipment and carry larger rates than skid steers. Ask about:
- Daily, weekly and monthly rates.
- Hour limits and overage.
- Fuel and cleaning rules.
- Delivery and pickup, which can be substantial.
- Operator training or certification requirements. Some companies require proof of training.
- Insurance and damage waiver. High-value machines often carry large deductibles.
- Deposit.
See understanding rental agreements, rental insurance basics and how to budget for farm equipment rentals.
Transport
Telehandlers often require a heavy trailer and a capable truck, and some are too heavy or tall for easy hauling. Check dimensions and weights, and plan the route. Delivery may be the safest option. See transporting rented equipment and oversize load permits.
Inspect before you accept
Check the boom, chains, pads, forks, hoses, tires, lights, load chart, seatbelt and safety devices. Make sure the load chart and operator manual are in the cab. Test boom functions, steering and brakes. Photograph existing damage and record hours. See understanding rental equipment condition reports.
Alternatives
- Skid steer with forks or spear. Cheaper for low lifts and short reach. See renting a skid steer.
- Tractor with loader. Good for bales at moderate height. See renting a tractor with front-end loader.
- Forklift. For warehouse-style lifting on firm ground.
- Custom hauler or crane. For unusual lifts.
Bottom line
A telehandler is the right rental when you need height and reach for bales, pallets and loading. Study the load chart, match the attachment to the load, operate on firm ground and get proper training. Compare with skid steers and loaders for jobs that do not need the extra reach.
Frequently asked questions
What can a telehandler do that a skid steer cannot?
It can lift loads much higher and farther forward, which helps with stacking bales and loading trucks. It has less digging power.
How do I read a telehandler load chart?
The chart shows capacity by boom angle and extension. Capacity decreases as the boom extends and rises, so check it before each lift.
Do I need training to operate a telehandler?
Training is strongly recommended, and some rental companies require it. Ask about requirements and use proper instruction.
Can a telehandler travel on rough ground?
Rough-terrain models are designed for it, but keep loads low and avoid steep slopes and soft edges.