Farm Equipment Rentals
Harvesting Equipment Rentals

Renting a Potato Harvester for Root Crops

Rent a potato harvester for root crops: single and two-row types, vine killing, soil conditions, bruising control, speed, sorting crew, storage, hauling, safety and costs.

5 min read1,104 wordsUpdated November 2026
Renting a Potato Harvester for Root Crops: illustration of a combine unloading grain into a cart

Potato harvesters lift tubers, separate them from soil and carry them to a truck or on-board hopper. They are complex machines that must be set for soil, variety and handling goals. Renting works for farms with a small acreage or a short window. This guide covers types, setup and planning, with the caveat that conditions vary by region and buyer.

How a harvester works

A digging blade slices under the row and lifts soil and tubers onto a series of chains. The chains shake away soil and carry potatoes to a cross conveyor or hopper. Vine rollers and haulm removal systems separate vines. Some machines include a sorting table where workers remove clods, rocks and damaged tubers.

See renting a carrot harvester for vegetables and renting an onion harvester for bulb crops for similar root and bulb machines.

Types

  • One-row harvesters. Smaller farms and tighter tractors.
  • Two-row harvesters. Higher capacity.
  • Elevator or windrower types. Lift and lay potatoes for later pickup.
  • Self-propelled machines. Large, specialized, usually custom.

Ask which types the dealer offers and what row spacing they fit.

Renting a Potato Harvester for Root Crops: illustration of a combine unloading grain into a cart
Illustration: a combine unloading grain into a cart. Original artwork for Farm Equipment Rentals.

Vines and skin set

Vines are usually killed or removed before harvest so skins can set, which reduces skinning and bruising. Methods and timing depend on variety, weather and buyer needs. Consult your extension office and buyer. See SARE publications, your state page and the USDA NRCS.

Soil conditions

Potatoes dig best in soil that is not too wet or too dry. Soil should crumble and fall away from tubers. Wet soil clumps and slows the chains, and very dry or cold soil raises bruise risk. Rocks and clods damage tubers and machines, so field prep matters. See renting a rock picker for field clearing. Pulp temperature also matters, so check local guidance.

Setting the harvester

  1. Digging depth. Deep enough to avoid cutting tubers, shallow enough to limit soil load.
  2. Chain speed. Fast enough to shake soil, slow enough to limit bruising.
  3. Agitation. Adjust per soil.
  4. Drop heights. Keep low, and use padding.
  5. Ground speed. Match chain speed.
  6. Tractor speed. Steady and moderate.

Dig a test row, and inspect tubers for cuts and bruises. Adjust and repeat.

Handling and storage

Truck beds and conveyors should be padded. Keep drop heights low and avoid long hauls on rough roads. Cure potatoes if storing, and manage temperature and humidity according to variety and use. Cold storage and ventilation matter. See renting a feed bin for bulk storage for general storage ideas, though potato storage requires specialized systems.

Common mistakes to avoid

  • Harvesting too wet or too cold.
  • Digging too deep.
  • Running chains too fast.
  • No sorting crew.
  • Poor storage plans.

Inspect before you accept

Check the blade, chains, bearings, rollers, belts, hydraulics, hitch, tires and shields. Test the machine empty. Photograph existing damage. See understanding rental equipment condition reports.

Safety

See the OSHA agricultural operations page and CDC NIOSH agriculture.

Transport

Harvesters are wide. Check lights, width and road rules. See DOT requirements for rented equipment transport and oversize load permits for rented equipment.

Costs and terms

Ask about daily and weekly rates, delivery, tractor needs and wear charges. Compare with custom harvest using the rental vs custom hire calculator. See how to budget for farm equipment rentals and understanding rental agreements.

Tractor needs

Harvesters need a tractor with enough weight, PTO or hydraulics, and traction on soft ground. Check hitch and tire clearance. See row crop tractor rentals.

Planning the harvest

Check maturity and soil conditions, and plan around buyer deliveries. Arrange a sorting crew, trucks and storage before the first row. Keep spare chain links, bolts and tools. Plan breaks so crew stay alert. Set a plan for rain. Keep a record of each field and bin.

Working with buyers

Buyers set standards for size, defects, bruising and variety. Ask for written specifications and delivery windows. Take samples to the buyer early and adjust the harvester if needed. Record loads, fields and quality results.

Troubleshooting

If tubers are bruised, slow chains, lower drop heights or wait for better soil. If soil carries over, adjust agitation. If the harvester plugs, slow down and clear. If digging cuts tubers, adjust depth. Contact the dealer when unsure.

Cleaning and return

Clean soil and vines from the machine, grease fittings and wash off. See returning farm equipment: cleaning and fuel rules.

A sample job

A small farm with five acres of potatoes rents a one-row harvester. The farmer kills vines, waits for skins to set and digs a test row. A crew of four sorts on the machine, and trucks haul to a cool shed. Bruising stays low, and the farm cleans the machine for return.

Questions to ask the dealer

  1. What row spacing does the harvester fit?
  2. What tractor do you recommend?
  3. Does it include a sorting table?
  4. What are the return requirements?
  5. Can you provide settings guidance?

Keeping records

Record dates, fields, soil conditions, yields and repairs. See record keeping for farm equipment rentals.

Reducing bruising step by step

Bruising happens at every transfer point. Walk the machine while it runs empty and look for steel-on-steel drops, then add padding or lower the heights. Run chains only as fast as needed to clear soil. Keep trucks close and half-full before topping off, so tubers fall short distances. Harvest when tuber pulp temperature is in the range advised locally, since cold tubers bruise more easily. Take samples to the buyer or a cut test early in the day and adjust.

Field edges and headlands

Turn areas and field edges often have compacted soil and rocks that cause damage. Plan to harvest the headlands last, or leave them for a separate pass at slower speed. Mark irrigation risers, power poles and wet spots. If you must cross ditches, build a firm crossing instead of risking a stuck harvester.

Bottom line

Potato harvest rewards patience and handling care. Rent a harvester that fits your rows, set it for soil and bruising, and plan crews and storage.

Frequently asked questions

Why are potatoes so easy to bruise?

Tubers are tender when soil is cold, wet or tubers are not mature.

Do I need a sorting crew?

Usually yes, to remove clods, rocks and damaged tubers.

When should I kill vines?

Follow local guidance and buyer needs.

Can I store potatoes right after harvest?

They often need curing and controlled conditions.

Keep reading

Harvesting Equipment Rentals

Renting an Onion Harvester for Bulb Crops

Rent an onion harvester for bulb crops: undercutting, windrowing, curing, topping, loading, bruising control, storage, labor, safety and costs for small acreage.

Harvesting Equipment Rentals

Round Baler Rentals: Sizing and Net Wrap

Rent a round baler with the right bale size, chamber type, net wrap or twine, tractor match, moisture settings, bale shape, handling plan, safety and return checklist.

Harvesting Equipment Rentals

Square Baler Rentals: Small and Large Squares

Rent a square baler for small or large bales: bale size, knotters, density, tractor power, accumulators, moisture, stacking, handling, safety and return checks.

Harvesting Equipment Rentals

Renting a Bale Grapple for Handling

Rent a bale grapple or spear for loaders and skid steers: types, capacity, tractor stability, handling round and square bales, safety, mounting systems and return checks.