Heat stress cuts feed intake, growth, milk and fertility. Water is one of the first things to watch in hot weather. Rented water chillers can lower drinking water temperature at dairies, feedlots, pens and show barns. This guide covers types, sizing and cautions.
Why cool water
Animals drink more when water is comfortable, and drinking helps them shed heat. Very warm water may reduce intake. Cooling may help in extreme heat, but it is only one part of a heat plan with shade, airflow, sprinklers and misting. See renting a misting system for livestock cooling and renting a fogger for barn cooling.
Types of chillers
- Inline chillers. Cool water as it flows through lines.
- Tank chillers. Cool water in a reservoir.
- Ice or glycol systems. Used in some setups.
- Evaporative cooling and shade. Simple options.
Ask the dealer what suits your flow and pens. Compare with renting a water trailer for livestock.
Capacity and sizing
Estimate peak water use, inlet water temperature and the temperature you want. Chillers are rated by capacity. Undersized units cannot keep up in a heat wave. Ask the dealer for a worked example. See Extension, SARE publications and your state page.
Power and plumbing
Chillers need reliable power, often three-phase. Check voltage, circuit size and grounding. Plumbing needs filters, valves, unions and drains. Insulate pipes to prevent heat gain. Install bypass lines so water continues if the chiller fails.
Insulation and location
Insulate tanks, troughs and lines. Shade the unit and keep airflow clear for the condenser. Place away from dust, manure and spray. Protect from rodents. Keep clearances for service.
Water quality
Cool water can still carry bacteria and algae. Clean troughs regularly, flush lines and test water. Use food-grade or potable-rated parts. Avoid placing chillers where manure can contaminate them.
Animal response
Watch intake and behavior. Some animals avoid very cold water. Ask your vet about target temperatures. Track drinking and production to see whether cooling helps.
Common mistakes to avoid
- Undersized units.
- Uninsulated lines.
- Blocked airflow.
- No bypass.
- Skipping cleaning.
Inspect before you accept
Check the compressor, fans, coils, pumps, fittings and controls. Run a test. Photograph existing damage. See understanding rental equipment condition reports.
Safety
- Lock out power before service. See the farm machinery lockout-tagout procedure template.
- Keep refrigerants sealed, since only certified technicians should open systems.
- Keep electrical connections dry.
- Keep children and animals away from fans and coils.
See the OSHA agricultural operations page and CDC NIOSH agriculture.
Transport
Chillers are heavy and delicate. Keep upright when moving. See the equipment transport tie-down checklist.
Costs and terms
Ask about weekly and monthly rates, power use, delivery and deposit. See how to budget for farm equipment rentals and understanding rental agreements.
Planning the summer
Install before heat waves. Test the system, and check trough flow and float valves. Plan power backup and spare parts. Keep a log of temperatures and animal response.
Troubleshooting
If water is not cooling, check airflow, refrigerant lines and capacity. If the unit trips breakers, check wiring and load. If flow is low, check filters and valves. If lines sweat or leak, check insulation and fittings. Contact the dealer when unsure.
Heat stress plan
Water chilling should be part of a larger plan. Provide shade, ventilation, sprinklers or misters, adjust feeding times and avoid handling animals during peak heat. Your vet can help build a plan. Watch for open-mouth breathing, drooling and weakness.
Cleaning and return
Drain, clean and dry the unit. Wipe coils and screens. See returning farm equipment: cleaning and fuel rules.
A sample job
A dairy rents an inline chiller for the summer to feed water to the holding pen and freestall troughs. The staff insulate lines, track intake and clean troughs daily. The chiller is cleaned and returned.
Questions to ask the dealer
- What capacity and power?
- What inlet temperatures does it handle?
- What plumbing is included?
- What are cleaning requirements?
- What damage terms apply?
Winter and storage
Drain the chiller completely before freezing weather. Store inside if possible. Ask the dealer for storage instructions if you keep it past the season.
Keeping records
Record temperatures, intake and maintenance. See record keeping for farm equipment rentals.
Understanding heat stress thresholds
Dairy cows can show heat stress at temperatures far below what people find extreme, especially with high humidity. Watch temperature-humidity index values, and act early rather than waiting for visible distress. Poultry and swine have their own thresholds, so ask your vet or extension office for numbers for your species.
Water flow rates and trough design
A chiller only helps if animals can drink enough from the cooled supply. Trough flow rate, space per head and float valve capacity matter. Long troughs with high flow are better than small bowls under heavy demand. Keep troughs clean and free of algae, and place them where animals will visit them.
Energy cost and efficiency
Chillers use significant power. Estimate cost by multiplying kilowatts by hours per day and rate per kilowatt-hour. Insulation, shade and clean condenser coils cut energy use. Compare cost with the value of better intake and production, or with cheaper tools like shade and fans.
Training and routine checks
Assign someone to check the chiller, troughs and temperatures every day. Walk the pens during peak heat to watch animals. Keep contact numbers for the dealer, electrician and vet on a card near the equipment.
Power backup
A heat wave is also when grid stress and outages happen. Ask about generator connections and sizing, and keep a manual bypass so animals always have water. Test backup power before the season.
Bottom line
Cooler water may help animals in heat if the chiller is sized, insulated and cleaned. Combine it with shade, airflow and a full heat plan.
Frequently asked questions
Does cold water improve production?
Results vary. Ask your vet or extension agent.
What power do chillers need?
Often significant. Check voltage and circuits.
Do I need a bypass?
Yes, so animals still have water if the unit fails.
How cold should the water be?
Ask your vet. Very cold water may reduce intake.