Subsurface drainage lowers the water table so fields dry out and crops root deeper. A tile plow, sometimes called a tubing plow, places flexible perforated tubing in the ground in one pass. Rentals are less common than trenchers, but custom installers and equipment dealers offer them. This guide covers fit, design and installation.
How tile plows work
A tractor or tracked machine pulls a shank that opens a narrow slot. Tubing feeds through a boot and sits at the bottom, while soil closes behind. Grade control keeps the tubing at the designed slope. Plows can run through long fields quickly.
Compare with renting a drainage trencher for field tile and renting a pipe puller for irrigation repair.
Design first
A drainage design shows main lines, laterals, spacing, depth and outlets. Spacing and depth depend on soils and crops. Heavy clay needs closer spacing. Ask NRCS, extension or a drainage engineer. See SARE publications, USDA NRCS and your state page. Check wetlands rules, since drainage can be restricted.
Tractor and plow
Tile plows need serious power and traction. Check horsepower, weight and tracks. Many use track machines. Ask the dealer about boots for different tubing sizes and the maximum depth. See four-wheel-drive tractor rentals for heavy work and the tractor ballast weighting guide.
Grade control
Grade is everything. A laser or GPS system keeps the boot on the design slope. Without good grade control, tile may sag and hold water. See renting a laser level for drainage grading and renting a gps guidance system for field work. Verify with a level check.
Tubing and filters
Choose tubing size and perforation type for your soils. Fine sands and silts may need filter socks to keep soil out. Handle tubing carefully, and keep dirt out of the ends. Connect with the right fittings.
Soil moisture
Install when soil is moist but not wet. Very wet soils smear, and dry hard soil resists the plow and shortens equipment life. Avoid working in frozen ground.
Outlets and main lines
Outlets must be protected from erosion, animals and mowing. Use rodent guards, rock and headwalls. Mains should be large enough for all laterals. Keep outlets accessible for inspection. See renting a culvert cleaner for drainage for related upkeep.
Common mistakes to avoid
- No design.
- Poor grade control.
- Dirty tubing.
- Unprotected outlets.
- Installing when soils are too wet.
Inspect before you accept
Check the plow, shank, boot, hydraulics, grade control and mounts. Photograph existing damage. See understanding rental equipment condition reports.
Safety
- Call 811 before plowing and map your own lines.
- Use ROPS and seatbelts. See the tractor rollover prevention checklist.
- Keep bystanders back from the plow.
- Lock out before service. See the farm machinery lockout-tagout procedure template.
- Watch for overhead lines.
See the OSHA agricultural operations page and CDC NIOSH agriculture.
Transport
Tile plows are heavy and awkward. See the equipment transport tie-down checklist, DOT requirements for rented equipment transport and oversize load permits for rented equipment.
Costs and terms
Ask about daily and weekly rates, operator charges, grade control fees and deposit. See how to budget for farm equipment rentals and understanding rental agreements.
Planning the job
Stake lines, mark outlets and map existing tile. Order tubing and fittings. Plan the order of laterals. Check forecasts. Keep spare parts and tools. Take photos and GPS points for as-built records.
Troubleshooting
If the plow wanders, check grade control and speed. If tubing kinks, adjust feed. If the tractor spins, add weight or use tracks. If tubing fills with soil, check filters. Contact the dealer when unsure.
Cost-share and programs
Some conservation programs support drainage that reduces erosion or manages nutrients. Check NRCS programs and farmers.gov.
Cleaning and return
Clean soil from the plow, grease fittings and refuel if required. See returning farm equipment: cleaning and fuel rules.
A sample job
A farm rents a tile plow with an operator to install laterals across a wet field. The crew follows a design, uses laser grade control, installs filter sock tubing and protects outlets. They record GPS points of every line.
Questions to ask the dealer
- What tubing sizes and depth?
- Is grade control included?
- Is an operator available?
- What are cleaning requirements?
- What damage terms apply?
Keeping records
Record as-built lines, depths, dates and costs. See record keeping for farm equipment rentals.
Understanding spacing and soils
Tile spacing depends on how fast water moves through soil. Sandy soils drain easily and need wider spacing, while heavy clay needs closer lines to get the same effect. Depth also matters, since deeper lines lower the water table more but cost more to install. Ask for a design that balances cost against crop response.
Mapping existing systems
Many fields already have old clay or concrete tile. Find old lines before you plow to avoid cutting them. Look for outlet pipes, wet streaks, surface inlets and old maps. A probe, ground-penetrating radar service or aerial imagery after rain can reveal lines. Record your new lines so future work avoids them.
Timing and crop planning
Install tile after harvest or before planting when soils are workable. A new system may need a season for soil to settle, and bare lines can erode. Plan seeding and residue cover over trenches. Talk to your crop adviser about expected yield gains.
Inspection after installation
Watch the outlets after a heavy rain to confirm flow. Low spots over the line or ponded water can signal failures. Use a camera or flow tests if you suspect a problem. Keep a log of outlet flow and field conditions.
Weather and compaction
Avoid running heavy machines across wet fields, which compacts soil and cancels some drainage benefit. Use tracks or lower tire pressure where possible, and stay on headlands when you can.
Bottom line
A tile plow installs drainage fast when design, grade and outlets are right. Protect your investment with records and maintenance.
Frequently asked questions
Do I need a design?
Yes. Spacing and depth depend on soil and crop.
Can I plow in wet soil?
Better to wait until soil is moist but not wet.
What is a filter sock?
A fabric cover that keeps soil out of tubing.
Can I drain a wetland?
Rules may restrict it. Check with NRCS.