Farm Equipment Rentals
Land Management and Specialty Equipment

Renting a Drainage Trencher for Field Tile

Rent a drainage trencher for field tile: wheel and chain trenchers, depth and width, rigid pipe versus tubing, bedding and gravel, grade control, safety, hauling and costs.

5 min read1,029 wordsUpdated November 2026
Renting a Drainage Trencher for Field Tile: illustration of a skid steer clearing brush near a pond

A drainage trencher digs a narrow trench to a designed depth and slope for tile. It is slower than plowing but more accurate, and works where you need rigid pipe, gravel envelopes or inspection of the trench. Rentals are often combined with operators. This guide covers choosing, design and safe use.

Trencher types

  • Wheel trenchers. A large cutting wheel digs fast, deep trenches in many soils.
  • Chain trenchers. A chain with teeth digs a clean trench and handles roots and some rock.
  • Backhoe or excavator. Works for small jobs. See excavator rentals for farm drainage and digging.
  • Walk-behind trenchers. For shallow work.

Compare with renting a tile plow for drainage installation and renting a ditch digger for irrigation lines.

Design and depth

Follow a design based on soils, crops and outlets. Typical depth is a few feet, but local recommendations vary. Spacing and size depend on soil and flow. Ask NRCS or an engineer. See SARE publications, USDA NRCS and your state page.

Renting a Drainage Trencher for Field Tile: illustration of a skid steer clearing brush near a pond
Illustration: a skid steer clearing brush near a pond. Original artwork for Farm Equipment Rentals.

Grade control

Use a laser or GPS to hold slope. Check grade with a level at intervals. Even small errors create low spots where water sits. See renting a laser level for drainage grading.

Pipe and bedding

Choose pipe type, size and joints. Rigid PVC or clay tile works for mains. Perforated corrugated tubing is common for laterals. Bed pipe in sand, gravel or fine soil without sharp rocks. Cover with a filter material in sandy soils. Keep pipe clean and capped until installed.

Backfill

Backfill in layers and compact lightly. Mound soil slightly to allow settling. Do not drop big rocks or clods on the pipe. Mark the line for future reference. Add a surface inlet where you want fast removal of surface water, using a proper intake.

Soil conditions

Wet soils can collapse trench walls and make backfill messy. Dry, hard soils wear teeth. Work when soils are moist but stable. Rocks may need a rock wheel or hammer.

Common mistakes to avoid

  • No design.
  • Poor grade.
  • Sharp rocks on pipe.
  • No filter in sandy soil.
  • Open trenches left overnight.

Inspect before you accept

Check the cutting wheel or chain, teeth, hydraulics, tracks, grade control and guards. Photograph existing damage. See understanding rental equipment condition reports.

Safety

  • Never enter a trench deeper than allowed without shoring or sloping.
  • Keep spoil back from edges.
  • Stay clear of the cutting wheel or chain.
  • Lock out before service. See the farm machinery lockout-tagout procedure template.
  • Call 811 before digging.
  • Fence or flag open trenches.

See the OSHA agricultural operations page and CDC NIOSH agriculture.

Transport

Trenchers are heavy. See the equipment transport tie-down checklist, DOT requirements for rented equipment transport and oversize load permits for rented equipment.

Costs and terms

Ask about daily and weekly rates, operator charges, teeth and chain wear, delivery and deposit. See how to budget for farm equipment rentals and understanding rental agreements.

Planning the job

Stake lines and mark outlets. Plan pipe delivery and gravel. Clear obstacles. Plan to dig only what you can lay and cover each day. Check forecasts. Keep records and photos.

Troubleshooting

If the trench walls cave, widen or shorten sections. If the machine bogs, reduce speed or depth. If teeth wear fast, check rocks. If grade drifts, recheck laser setup. Contact the dealer when unsure.

Surface inlets and outlets

Surface inlets remove ponded water through a riser connected to tile. Protect them with grates and rock. Outlets need protection from erosion and animals. Keep both accessible. See renting a culvert cleaner for drainage.

Cleaning and return

Remove mud, clean teeth and chain, grease and refuel. See returning farm equipment: cleaning and fuel rules.

A sample job

A farm rents a wheel trencher with an operator to install a main line across a wet field. The crew uses laser grade control, beds PVC in sand and backfills in layers. They record GPS points.

Questions to ask the dealer

  1. What depth and width can it cut?
  2. Is grade control included?
  3. Is an operator available?
  4. What are cleaning requirements?
  5. What damage terms apply?

Insurance and liability

Check coverage for rented machinery and damage to buried lines and neighbors. Keep photos and permits.

Keeping records

Record as-built lines, depths and pipe sizes. See record keeping for farm equipment rentals.

Gravel envelopes and filters

In some soils, gravel around the pipe helps water enter and keeps fine soil out. Sock-wrapped tubing may do the job at lower cost. Ask the engineer which fits your soil, because wrong choices lead to plugged lines. Gravel needs a hauling and placing plan, which adds time and cost to trenching.

Working with the operator

An experienced operator knows how to read soil, spot problems and adjust speed. Walk the field together, review the design and agree on stopping points. Do not rush operators near hazards, and keep your own crew out of the swing and cutting zones.

Sequencing mains, laterals and outlets

Dig the outlet first, then the main, then laterals. Starting from the outlet lets water drain from the trench as you work and reveals grade problems early. Cap ends and mark locations until tied in. Install cleanouts or access points at key places for future maintenance.

Weather windows

Wet weather can halt trenching for days. Have a plan for open trenches if a storm hits, such as covering ends or diverting water. Aim to finish each section the day you start it, and avoid leaving trenches open overnight.

Surveying before you start

Walk the field after a rain to see where water stands, and mark wet spots. Compare with soil maps from NRCS. These clues help your designer place lines where they matter most.

Bottom line

A drainage trencher builds tile lines accurately when design, grade and bedding are right. Dig safely and record what you install.

Frequently asked questions

Wheel or chain trencher?

Wheel trenchers are fast in many soils. Chain trenchers handle roots and some rock.

Do I need gravel?

Often in sandy soils. Ask NRCS or an engineer.

How deep should tile go?

Depends on design and soils.

Can I trench in wet soil?

Poorly. Wait for moist, stable soil.

Keep reading

Land Management and Specialty Equipment

Renting a Grader for Farm Road Maintenance

Rent a motor grader or tractor grader blade for farm roads: crown and ditching, blade angle, gravel addition, moisture timing, operator skills, safety, transport and costs.

Land Management and Specialty Equipment

Renting a Box Blade for Driveway Repair

Rent a box blade for driveway and lane repair: tractor size, scarifier shanks, crown and slope, gravel spreading, potholes, culvert ends, hitching, safety and costs.

Land Management and Specialty Equipment

Renting a Laser Level for Drainage Grading

Rent a laser level for drainage grading: rotating lasers, receivers, tripods, grade setting, machine-mounted control, field checks, error sources, safety and cost.

Land Management and Specialty Equipment

Renting a Forestry Mulcher for Land Clearing

Rent a forestry mulcher to turn brush and trees into mulch: skid steer or excavator mounts, drum and teeth, flow needs, safety cabs, fire risk, soil care, transport and costs.