Farm Equipment Rentals
Irrigation and Water Equipment Rentals

Renting a Slurry Pump for Manure

Rent a slurry pump to move liquid manure from pits and lagoons: pump types, agitation, solids and gas hazards, hoses, spreading rules, permits, safety and cleaning.

5 min read1,047 wordsUpdated November 2026
Renting a Slurry Pump for Manure: illustration of a center pivot and a diesel pump at a pond

Slurry pumps move liquid manure from pits, tanks and lagoons to spreaders or fields. Many farms hire custom applicators, but renting a pump can make sense for emptying a pit or moving manure between storage. This work is hazardous, so planning and safety come first.

Types of slurry pumps

  • Chopper pumps. Cut fibrous solids.
  • Centrifugal pumps. High flow for thin slurry.
  • Piston or progressive cavity pumps. Handle thick material.
  • PTO or engine-driven units.

Compare with renting a trash pump for dirty water. Ask the dealer which type suits your manure and distance.

Agitation

Solids settle, and slurry pumps work best with agitation. Without it, the pump may draw only liquid and leave a sludge layer. Agitation releases gases quickly, so it needs extreme caution. Follow all guidance from the dealer and experts.

Renting a Slurry Pump for Manure: illustration of a center pivot and a diesel pump at a pond
Illustration: a center pivot and a diesel pump at a pond. Original artwork for Farm Equipment Rentals.

Gas hazards

Manure pits release hydrogen sulfide, methane, ammonia and carbon dioxide. These can kill within seconds. Never enter a pit or tank without proper training, equipment and a rescue plan. Keep people and animals out of buildings during agitation, and ventilate fully. Learn more from CDC NIOSH agriculture and your extension office.

Hoses and connections

Use hoses rated for the pump's pressure. Secure couplings, and anchor discharge ends. Lay hoses to avoid roads and ditches. Keep hoses clean after use. See SARE publications and your state page.

Application rules

Manure application is regulated in many places. Know your nutrient management plan, rates, setbacks from streams and wells, timing rules and record requirements. Avoid frozen or saturated ground. See the USDA NRCS and EPA agriculture pages. Talk to your conservation office.

Common mistakes to avoid

  • Entering pits.
  • Agitating without ventilation.
  • Hose leaks.
  • Over-application.
  • Ignoring weather.

Inspect before you accept

Check the pump, seals, hoses, couplings and engine. Test run if possible. Photograph existing damage. See understanding rental equipment condition reports.

Safety

See the OSHA agricultural operations page.

Transport

Pumps and hoses need secure hauling. See the equipment transport tie-down checklist.

Costs and terms

Ask about daily and weekly rates, cleaning fees, hose charges and damage terms. Some dealers charge extra for manure contamination. See how to budget for farm equipment rentals and understanding rental agreements.

Planning the job

Check forecasts, soil moisture and crop stage. Plan field entry and spreading routes. Notify neighbors if odors are likely. Keep records of date, volume and field. Arrange backup in case of breakdown.

Troubleshooting

If the pump clogs, shut down and clear it safely. If flow drops, check hoses and agitation. If seals leak, stop and call the dealer. If odors drift, stop or change timing. Contact the dealer when unsure.

Odor and neighbors

Manure smells travel. Avoid spreading before holidays, on windy days toward homes and when neighbors are outdoors. Incorporating manure into soil reduces odor and nutrient loss. Good communication prevents complaints.

Cleaning and return

Rinse thoroughly with clean water, drain and let the pump dry. Dispose of rinse water as manure. See returning farm equipment: cleaning and fuel rules.

A sample job

A dairy rents a PTO slurry pump to empty a pit before fall. The crew ventilates, follows a nutrient plan, spreads on fields with setbacks and logs volumes. The pump is rinsed thoroughly and returned.

Questions to ask the dealer

  1. What type of manure is the pump for?
  2. What power and flow?
  3. What cleaning is required?
  4. What hoses are included?
  5. What damage terms apply?

Insurance and liability

Ask your insurer about coverage for spills, equipment damage and injuries. A manure release into a stream can be costly. Keep emergency numbers handy.

Keeping records

Record dates, volumes, fields, rates and weather. See record keeping for farm equipment rentals.

Matching the pump to your manure

Dairy slurry, swine lagoon effluent and beef pit manure differ in thickness, bedding content and solids. Fibrous bedding such as straw or sawdust can wrap impellers, so chopper pumps help. Sand bedding wears pumps fast. Tell the dealer what you pump so the right model and wear parts are matched.

Weather and timing

Do not apply slurry before heavy rain, on frozen or snow-covered ground or on saturated soil, because runoff can reach streams and wells. Check forecasts for several days ahead, and plan fields with the lowest risk first. Keep records of application dates, rates and weather.

Spill response

Keep soil, sandbags and a pump ready in case a hose or coupling fails. Shut down the pump immediately, contain the flow and call your conservation office or environmental agency if manure reaches water. Quick action limits damage and penalties.

Hygiene and health

Wash hands and boots after contact, avoid eating or drinking near the pump, and keep children away. Manure can carry bacteria that cause illness. Clean and disinfect tools and hoses before they leave the farm.

Hose layout and traffic

Lay hoses along field edges rather than across farm roads. Where hoses must cross roads, use ramps or bridges and flag them so vehicles do not crush them. Keep a person at crossings if traffic is likely, and never leave a pressurized hose unattended near roads.

Calibrating application

Estimate the volume spread per acre by measuring flow and travel time. Use sample catch pans to check uniformity. Adjust speed or flow so the application matches your plan and crop needs. Send manure samples to a lab to know nutrient content.

Training and emergency plans

Make sure everyone on the job knows the shutoff, the escape route and the emergency number. Post the plan where it can be seen. Practice what to do if someone collapses near a pit: call for help and do not enter.

Bottom line

Slurry pumping is hazardous and regulated. Keep out of pits, agitate with care, follow your plan and clean equipment well.

Frequently asked questions

Can I enter a manure pit to clear it?

No. The gases can kill quickly. Use professionals.

Do I need a plan?

Often. Follow your nutrient management rules.

Why agitate?

Solids settle. Agitation keeps them in suspension.

Is spreading regulated?

In many places, yes. Check local rules.

Keep reading

Tillage and Soil Preparation Equipment

Slurry Tanker Rentals for Liquid Manure

Rent a slurry tanker for liquid manure: vacuum and pump types, tank sizes, injection versus broadcast, agitation, odor, setbacks, nutrient rates, safety gases and cleanup.

Irrigation and Water Equipment Rentals

Renting a Fertigation System for Nutrient Delivery

Rent a fertigation injector system to apply fertilizer through irrigation: injector types, tanks, mixing, backflow protection, rates, calibration, safety and cleanup.

Irrigation and Water Equipment Rentals

Irrigation Pump Rentals: Types and Sizing

Rent an irrigation pump sized right: centrifugal, submersible and PTO types, flow and head, suction lift, fuel or power, hoses, priming, filtration, safety and water rights.

Irrigation and Water Equipment Rentals

Renting a Water Pump for Flood Irrigation

Rent a water pump for flood irrigation of fields and pastures: high-volume pumps, intake and gates, flow planning, leveling, runoff control, safety and permits.