Farm Equipment Rentals
Irrigation and Water Equipment Rentals

Renting a Ditch Digger for Irrigation Lines

Rent a ditch digger for irrigation lines: trencher types, depth and width, soil and rock limits, utility locates, pipe bedding, backfill, safety, transport and costs.

5 min read1,046 wordsUpdated November 2026
Renting a Ditch Digger for Irrigation Lines: illustration of a center pivot and a diesel pump at a pond

Ditch diggers and trenchers cut narrow trenches for irrigation pipe, drain lines and utilities. Renting one is cheaper than buying for most farms. This guide helps you pick the machine, plan the trench and work safely.

Machine types

  • Walk-behind trenchers. Small jobs and shallow trenches.
  • Ride-on trenchers. Longer runs and deeper cuts.
  • Chain trenchers. Common for pipe lines.
  • Wheel trenchers. Rock or hard soil.
  • Backhoe or excavator. Large or deep trenches. See excavator rentals for farm drainage and digging.

See also renting a trencher for water lines.

Choosing depth and width

Pipe depth depends on frost, traffic and local codes. Trench width should fit the pipe with room for bedding. Ask the dealer about depth ratings and width options. See SARE publications, USDA NRCS and your state page.

Renting a Ditch Digger for Irrigation Lines: illustration of a center pivot and a diesel pump at a pond
Illustration: a center pivot and a diesel pump at a pond. Original artwork for Farm Equipment Rentals.

Soil and rock

Soft soils dig easily but may cave. Clay can be sticky, and rocks can stop a trencher. Probe the line first. For rocky ground, ask about a rock wheel or a different machine. See renting a rock picker for field clearing.

Utility locates

Call your utility locating service before digging. In the United States, dial 811 to arrange marking of buried lines. Respect marked lines, and hand-dig near them. Know where drain tiles, wells, septic fields and irrigation lines are. Private lines may not be marked, so use farm maps.

Layout and grade

Mark the trench route with flags or paint. Plan slopes for drainage lines. Use a laser or string line to keep grade. Avoid sharp turns that complicate pipe laying.

Bedding and backfill

Lay pipe on a firm bed of sand or fine material free of rocks. Backfill in layers and compact lightly. Leave a slight mound to allow settling. Do not drop large rocks onto the pipe. Pressure test the line before covering if possible.

Common mistakes to avoid

  • Skipping locates.
  • Wrong depth.
  • Rocks on pipe.
  • Uneven grade.
  • Working in unsafe trenches.

Inspect before you accept

Check the chain, teeth, hydraulics, tires or tracks, controls and guards. Test run. Photograph existing damage. See understanding rental equipment condition reports.

Safety

  • Never enter a deep trench without sloping, shoring or a trench box.
  • Keep spoil piles back from the edge.
  • Stay clear of the chain and moving parts.
  • Lock out before service. See the farm machinery lockout-tagout procedure template.
  • Wear boots, gloves, eye and hearing protection.
  • Keep children away.

See the OSHA agricultural operations page and CDC NIOSH agriculture.

Transport

Trenchers can be heavy. Use a rated trailer and tie-downs. See the equipment transport tie-down checklist and DOT requirements for rented equipment transport.

Costs and terms

Ask about daily and weekly rates, delivery, teeth or chain replacement and deposit. See how to budget for farm equipment rentals and understanding rental agreements.

Planning the job

Walk the route, flag obstacles and plan the order of work. Have pipe, fittings and bedding ready before digging so trenches do not stay open long. Plan for weather, because rain can collapse walls. Keep spare teeth and tools.

Troubleshooting

If the chain slips, check tension and teeth. If the machine bogs, reduce speed or depth. If walls cave, widen or shore. If the grade drifts, check the laser or line. Contact the dealer when unsure.

Working near fields and livestock

Keep open trenches fenced or flagged so animals and people do not fall in. Backfill promptly. Restore topsoil and seed disturbed ground to prevent erosion.

Cleaning and return

Remove mud, clean teeth and chains, grease fittings and refuel if required. See returning farm equipment: cleaning and fuel rules.

A sample job

A grower rents a ride-on trencher to bury a mainline across a field. The crew calls 811, flags the route, beds the pipe in sand and backfills in layers. The trencher is cleaned and returned.

Questions to ask the dealer

  1. What depth and width can it cut?
  2. Can it handle my soil?
  3. What teeth or chain options exist?
  4. What are cleaning requirements?
  5. What damage terms apply?

Insurance and liability

Ask whether your policy covers rented machinery and damage to buried lines. Cutting a utility line can lead to large bills. Keep locate tickets and photos.

Keeping records

Record the route, depth, pipe type and any depth changes. See record keeping for farm equipment rentals.

Frost depth and pipe type

In cold climates, bury irrigation lines below frost depth or plan to drain them each fall. PVC, polyethylene and aluminum each have different strength and joining methods, so make sure your trench width and depth fit your pipe. Follow manufacturer instructions for bedding and cover depth, and check local codes.

Digging speed and production

Trenchers can cut a few hundred feet an hour in good soil, but rocks, roots and wet clay slow progress. Plan realistic daily footage, and rent for an extra day if the schedule is tight. Keep the crew in sync so pipe laying keeps pace with digging.

Restoring the site

Save topsoil and replace it on top. Seed or mulch bare strips, and mark pipe locations on your farm map. Leave a few extra feet of pipe at the ends for future connections.

Working alone vs with a crew

Trenching alone is risky. Have another person on site who can call for help, shut down the machine and watch for hazards. Agree on hand signals before starting. See the hand signal guide for farm equipment.

Water testing the line

Before backfilling, pressure test the line with water to find leaks at joints. Mark and fix leaks while the pipe is exposed. Leave the pipe slightly pressurized while backfilling to spot problems early.

Wet weather planning

Rain turns trench spoil to mud and makes walls unstable. Cover spoil piles with plastic if rain is coming, and pump out standing water before laying pipe. Postpone work if soils are saturated.

Bottom line

Ditch diggers lay irrigation lines quickly when locates, depth and bedding are right. Dig safely and backfill carefully.

Frequently asked questions

Do I need to call 811?

In the United States, yes, before digging.

How deep should pipe go?

It depends on frost, traffic and local codes.

Can a trencher handle rocks?

Some can with rock wheels. Ask the dealer.

Is it safe to enter a trench?

Not without sloping, shoring or a trench box.

Keep reading

Irrigation and Water Equipment Rentals

Renting a Trencher for Water Lines

Rent a trencher for water lines to barns, troughs and hydrants: trencher size, depth below frost, utility locates, pipe choice, bedding, tracer wire, testing and safety.

Irrigation and Water Equipment Rentals

Renting a Pipe Puller for Irrigation Repair

Rent a pipe puller or pipe plow to install or repair irrigation lines: types, tractor needs, depth, pipe sizes, locates, fittings, pressure tests, safety and costs.

Irrigation and Water Equipment Rentals

Renting a Soil Moisture Probe for Scheduling

Rent soil moisture probes and sensors for irrigation scheduling: probe types, installation depth, calibration, reading charts, data loggers, mistakes and how to use results.

Irrigation and Water Equipment Rentals

Renting a Cistern for Water Storage

Rent a cistern or storage tank for farm water: tank sizes, materials, placement, filling, pumps, freeze and algae control, livestock and irrigation use, safety and costs.