Farm power outages are more than an inconvenience. Milking equipment stops, ventilation fails in poultry and hog barns, well pumps go quiet, grain dryers shut down and freezers warm up. A rented generator can bridge a storm, power a remote worksite or keep a critical system running during repairs. But a generator that is too small stalls, and one that is wired wrong can injure a lineworker or burn a building. This guide explains how to size, connect and run a rented generator safely.
Types of generators
- Portable engine generators. Gasoline, diesel or propane engines driving an alternator. Sizes range from small units to large trailer-mounted sets.
- PTO generators. Driven by a tractor's power takeoff. Efficient on farms with a suitable tractor, since the tractor is already there.
- Trailer-mounted diesel generators. Larger, often with fuel tanks that run for many hours or days.
- Inverter generators. Quieter and fuel efficient, but limited in size and best for sensitive electronics.
- Standby generators. Permanently installed, not usually rented.
Choose by size, fuel availability, noise and how long you need power.
Determine your load
The key step is calculating how many watts you need.
- List every device you want to power. Include motors, pumps, lights, fans, heaters, milking equipment, controls and chargers.
- Find running watts. Check nameplates or manuals for volts and amps, then multiply (watts equals volts times amps), or find the wattage rating.
- Find starting watts for motors. Electric motors can draw several times their running power when starting. Pumps, compressors, augers and refrigeration need extra capacity.
- Add running loads, then add the largest starting surge. A simple approach is to total running watts and add the biggest motor's extra starting watts.
- Add a margin. A generator running near its limit is hard on itself and on equipment. A common practice is to leave some capacity above your estimated load.
- Check voltage and phase. Many farm motors are single-phase 240 volts, while larger motors may be three-phase.
An electrician or the rental company can help with the calculations. Ask them to size the unit, and describe your loads accurately.
Single phase versus three phase
Most small generators supply single-phase power, while many larger farm motors, such as grain dryers, irrigation pumps and some milking systems, need three-phase. If you need three-phase, tell the dealer. Three-phase generators are available, but they are larger and more expensive, and some single-phase generators cannot supply three-phase loads safely. Ask for a unit with the correct voltage configuration, and check the plug and receptacle types.
PTO versus engine generators
| Feature | PTO generator | Engine generator |
|---|---|---|
| Power source | Tractor PTO | Own engine |
| Fuel | Tractor diesel | Gasoline, diesel or propane |
| Tractor required | Yes, sized for load | No |
| Portability | Moves with tractor | Trailer or skid mounted |
| Noise | Tractor noise | Engine noise |
| Runtime | Limited by tractor use | Limited by fuel tank |
| Good for | Farms with spare tractor | Remote sites, backup |
PTO units can be economical, but your tractor will be tied up for the duration of the outage. See renting a tractor if you need a second tractor.
Connecting safely
How you connect the generator is critical.
- Use a transfer switch. A manual or automatic transfer switch isolates the building wiring from the utility grid and prevents backfeeding, which can electrocute lineworkers.
- Never connect a generator to a household or farm circuit by plugging into an outlet (backfeeding). This is dangerous and illegal in many places.
- Use heavy-duty extension cords rated for the load, with proper gauge and length for the distance. Avoid daisy chains.
- Ground the generator properly, following the manufacturer's instructions and local code.
- Use ground-fault protection for outdoor and wet locations.
- Have a licensed electrician install and inspect connections for larger systems.
Ask the rental company about transfer switch options and cable kits. If a rental includes a camlock distribution panel, make sure your electrician is familiar with it.
Carbon monoxide and fire safety
Generators produce carbon monoxide, which is odorless and deadly.
- Run generators outdoors only, far from doors, windows and vents. Never run them in barns, garages, sheds or enclosed spaces.
- Install carbon monoxide detectors in nearby living areas.
- Keep generators dry, under a proper canopy or cover where allowed, but with open air flow.
- Let the generator cool before refueling. Spilled fuel on a hot engine can ignite.
- Store fuel in approved containers, away from ignition sources and living areas.
- Keep a fire extinguisher nearby.
- Keep children and animals away.
See the OSHA agricultural operations page and NIOSH agriculture resources for general safety guidance.
Fuel planning
A generator running continuously burns fuel quickly. Ask the dealer for expected consumption at your load, and plan supply:
- Know the tank capacity and runtime at your load.
- Have extra fuel on hand, in approved containers.
- Arrange delivery for long outages.
- Use fresh fuel and keep it clean.
- For diesel, check cold-weather fuel quality.
- Do not overfill, and avoid spills.
Check the rental's fuel policy. Some companies deliver the unit full and expect it back full, with surcharges otherwise. See returning farm equipment: cleaning and fuel rules and tractor rental fuel policies.
Planning for outages and emergencies
Do not wait for the outage to find out who rents generators. Call dealers in advance, ask about availability during storms, and reserve if possible. Know which loads are critical and have a priority list. During storms, demand surges and supplies run short. See emergency equipment rentals for storm damage, how weather affects rental bookings and fees and renting equipment for disaster recovery.
Transport, setup and noise
Larger generators are heavy and may require a trailer or a loader. Place the unit on firm, level ground, away from standing water, with room for ventilation. Consider noise for neighbors and livestock. Some animals are sensitive, so test the setup before an emergency if possible.
Costs and terms
Ask about:
- Daily, weekly and monthly rates.
- Hour limits and maintenance during long rentals.
- Fuel policy and consumption.
- Delivery, pickup and set-up services.
- Cable, transfer switch or distribution panel rentals.
- Damage waiver and deductible.
- Deposit.
See rental insurance basics, how to budget for farm equipment rentals and understanding rental agreements.
Inspect and test
Before you accept the generator, check oil, fuel, air filter, cables, outlets, breakers and the control panel. Start it and verify voltage and frequency under a test load. Record hours and photograph existing damage. See understanding rental equipment condition reports.
Bottom line
A generator rental can protect animals, crops and income when the power fails. Calculate loads including starting surges, choose the right phase and size, connect through a transfer switch, run outdoors for carbon monoxide safety, plan fuel and reserve ahead of storm season.
Frequently asked questions
How do I know what size generator I need?
Add up the running watts of everything you need, then account for the starting surge of motors and add a margin. An electrician or rental company can help.
Can I plug a generator into a wall outlet?
No. Backfeeding is dangerous and illegal in many places. Use a transfer switch or approved connection.
Can I run a generator in my barn?
No. Generators emit carbon monoxide and must be run outdoors, away from buildings and vents.
Is a PTO generator better than an engine generator?
It depends on your tractor and needs. PTO units use your tractor and are economical, but they tie it up during use.