Dairy cows eat best when each bite is balanced. A total mixed ration, or TMR, combines forage, grain, protein and minerals into one feed. A rented TMR mixer helps a dairy test the system, cover repairs or handle peak demand. This guide covers capacity, setup, feeding and care. Work with your nutritionist for ration decisions.
What a TMR mixer does
A TMR mixer weighs and blends ingredients, chops forage and delivers the mix to feed bunks. Many are vertical or horizontal auger mixers, pulled by tractors or self-propelled. Scales and indicators allow accurate batches.
See renting a feed mixer wagon for rations for general mixer types and renting a feed bunk cleaner for bunk management.
Group feeding
Dairy herds are fed in groups, such as fresh cows, high producers, low producers, dry cows and heifers, each with a different ration. Batch size and mixer capacity must match group sizes. A mixer that is too large wastes feed in small batches, and one that is too small needs extra loads. Plan the order of groups to reduce cleaning between rations.
Capacity and batch sizing
Check how much the mixer can mix for good quality, which is often less than the full hopper volume. Overfilling reduces mixing quality. Ask the dealer for working capacity. Plan batch sizes so the mixer runs at a good fill level.
Scales and recipes
Accurate scales are essential. Use recipes from your nutritionist, and record each batch. Calibrate the scales and check for drift. Keep a log of ingredient weights and errors. Compare actual feed delivered to expected intake.
Mixing order and time
Load ingredients in an order that mixes well, often long hay first, then dry feeds, then wet feeds and liquids. Follow the manual. Mixing time affects particle length and feed texture. Overmixing can chop fiber too short and reduce rumen health. Under-mixing leaves clumps and allows sorting. Use a particle separator to check results. See SARE publications and your state page.
Delivering feed
Deliver feed on a consistent schedule and distribute evenly along the bunk. Push up feed often to keep it available. Remove refusals and spoiled feed. Keep records of feed offered and refused. Clean spills to avoid attracting pests.
Common mistakes to avoid
- Overfilling the mixer.
- Wrong loading order.
- Skipping scale checks.
- Poor cleaning between groups.
- Ignoring refusals.
Inspect before you accept
Check the tub, augers, knives, gearbox, scales, discharge door, PTO shaft, tires and hitch. Run it empty. Photograph existing damage. See understanding rental equipment condition reports.
Safety
- Lock out before servicing. See the farm machinery lockout-tagout procedure template.
- Keep PTO shields in place. See the PTO safety shield inspection form.
- Never climb into a running mixer.
- Keep people away from discharge and augers.
- Watch for animals and workers in feed alleys.
See the OSHA agricultural operations page and CDC NIOSH agriculture.
Costs and terms
Ask about daily and weekly rates, delivery, deposit and wear charges. Compare with buying using the rental vs custom hire calculator and the lease vs buy machinery decision worksheet. See how to budget for farm equipment rentals and understanding rental agreements.
Tractor needs
Check horsepower, PTO and hitch. See utility tractor rentals: sizing guide and four-wheel-drive tractor rentals for heavy work.
Planning the trial
Run the mixer for several weeks to see intake, milk and refusals. Keep the nutritionist informed. Collect data and compare. Note labor time and fuel. Decide whether the mixer fits your system before you buy.
Troubleshooting
If cows sort, check particle length and mixing time. If clumps form, check moisture and order. If feed is inconsistent, check scales and loading. If knives dull, replace them. Contact the dealer when unsure.
Cleaning and return
Clean the tub daily, remove leftover feed, wash and dry, and grease fittings. See returning farm equipment: cleaning and fuel rules.
A sample trial
A 120-cow dairy rents a vertical TMR mixer for a six-week trial. The farmer loads in a set order, uses a particle separator and tracks refusals. Intake improves, and sorting drops. The dairy compares costs and decides whether to buy.
Questions to ask the dealer
- What is the working capacity?
- What scales and recipe features exist?
- What tractor do you recommend?
- What are the cleaning requirements?
- Can it be delivered?
Herd health and TMR
A consistent ration supports rumen health and milk production, but bad feed spoils quickly in a mixer. Remove moldy or spoiled forage, and clean the mixer to avoid cross-contamination between groups, especially with medicated feed. Check feed for foreign material. Watch cows for changes in manure, intake and milk, and share data with your veterinarian and nutritionist.
Keeping records
Record batches, weights, refusals and herd data. See record keeping for farm equipment rentals.
Particle length and rumen health
Cows need effective fiber to keep the rumen working. Too short and they may sort or suffer acidosis, and too long and they sort out the coarse pieces. Particle separators show how much feed is retained on each screen. Take samples from the bunk, not just the mixer, since feed changes as it sits. Adjust mixing time and knife condition based on the results, and ask your nutritionist for target ranges.
Feed bunk management
A well-mixed ration still fails if bunks are empty or spoiled. Deliver feed at set times, push it up often, and remove refusals before they spoil. In hot weather, feed in smaller batches to reduce heating. In cold weather, watch for frozen feed. Keep bunks clean and level, and fix cracks that trap spoiled feed. A few minutes of bunk work each day protects the benefits of the TMR.
Bottom line
A TMR mixer delivers consistent rations when scales, order and cleaning are right. Test a rental before you buy, and work with your nutritionist.
Frequently asked questions
What is a TMR?
A total mixed ration that blends forage, grain and supplements.
How do I check mixing quality?
Use a particle separator and watch for sorting.
How often should I clean the mixer?
Daily, to prevent mold and cross-contamination.
Can I trial a mixer?
Yes. Rentals are a good way to test.