Farm Equipment Rentals
Livestock and Hay Equipment Rentals

Renting a Feed Bunk Cleaner

Rent a feed bunk cleaner to remove refusals and keep bunks fresh: blades, skid steer or tractor mounts, hydraulics, concrete fit, cleaning routine, safety and costs.

5 min read1,054 wordsUpdated November 2026
Renting a Feed Bunk Cleaner: illustration of a livestock trailer and squeeze chute beside a hay barn

Old feed in a bunk spoils, attracts flies and discourages cows and cattle from eating. Cleaning bunks by hand is slow, hard work. A bunk cleaner attached to a skid steer, loader or tractor scrapes refusals out quickly and leaves a clean surface. Renting one is useful for seasonal bunk work or to test the idea before buying.

What a bunk cleaner does

Most bunk cleaners have a rubber or steel blade, a brush or a conveyor that scrapes feed and debris from the bunk and moves it out. Some push refusals to the end of the bunk or into a pile. Others lift them into a cart or spreader. Compare with renting a feed mixer wagon for rations and TMR mixer rentals for dairy operations.

Types

  • Scraper blades. A blade pushes feed along the bunk. Simple and low cost.
  • Brush units. Rotating brushes clean surfaces gently.
  • Conveyor cleaners. Move feed into a trailer or pile.
  • Combination units. Scrape and brush.

Ask which type fits your bunk surface and cleaning goal.

Renting a Feed Bunk Cleaner: illustration of a livestock trailer and squeeze chute beside a hay barn
Illustration: a livestock trailer and squeeze chute beside a hay barn. Original artwork for Farm Equipment Rentals.

Bunk fit

Measure your bunk width and depth. The blade should match the bunk profile and leave little feed behind. Check bunk surface: concrete may have grooves or cracks, and metal or plastic bunks may be easier to scrape. Rough concrete wears blades and traps feed. Sealing or coating bunks can help. Check your extension office; see SARE publications and your state page.

Mounts and power

Many cleaners attach to a skid steer or loader with a quick-attach plate. Some use auxiliary hydraulics for brushes or conveyors. Check your machine's hydraulic flow and pressure. See renting a skid-steer: uses and rates and renting a tractor with front-end loader.

Cleaning routine

  1. Remove refusals before fresh feed arrives.
  2. Scrape wet feed first, since it spoils fastest.
  3. Clean the surface, including corners and the area under feed rails.
  4. Handle waste in a pile or spreader away from animals and water.
  5. Check the bunk for cracks and rough spots.

In hot weather, clean more often.

Waste handling

Removed feed is a nutrient source but also a fly and odor problem. Compost or spread it promptly following local rules. Keep waste away from streams and wells. See the USDA NRCS for guidance.

Common mistakes to avoid

  • Dull or worn blades.
  • Ignoring bunk damage.
  • Cleaning too rarely.
  • Leaving waste near the bunk.
  • Wrong attachment fit.

Inspect before you accept

Check the blade, brush, frame, hydraulic hoses, fittings and quick-attach. Test all functions. Photograph existing damage. See understanding rental equipment condition reports.

Safety

See the OSHA agricultural operations page and CDC NIOSH agriculture.

Transport

Attachments can be wide. Secure them for travel. See the equipment transport tie-down checklist.

Costs and terms

Ask about daily and weekly rates, delivery, deposit and wear charges. See how to budget for farm equipment rentals and understanding rental agreements.

Planning a cleaning schedule

Decide how often you clean, who does it and where waste goes. Many dairies clean once or twice a day, and beef lots clean as needed. Write the routine and train helpers. Keep spare blades and tools.

Troubleshooting

If feed remains, adjust blade height or replace worn edges. If the blade chatters, check the surface and speed. If hydraulics lag, check fluid and hoses. If the unit leaks, stop and repair. Contact the dealer when unsure.

Cleaning and return

Wash the attachment, dry and grease. See returning farm equipment: cleaning and fuel rules.

A sample week

A dairy rents a bunk scraper for a summer fly season. The crew cleans bunks after each feeding, hauls waste to a pile and tracks refusals. Cows eat better, and flies drop. The dairy returns the attachment on time.

Questions to ask the dealer

  1. What bunk widths does it fit?
  2. What mount and hydraulic needs?
  3. How worn is the blade?
  4. What are the cleaning requirements?
  5. Can I try it on my bunk?

Feed hygiene and animal health

Moldy or spoiled feed can cause digestive problems and reduce intake. Clean bunks reduce this risk, and a consistent routine is better than occasional big cleanups. Watch animals for changes in intake and manure, and talk to your veterinarian about issues. Keep water clean as well, because dirty water lowers feed intake.

Keeping records

Record dates, cleaning times, refusals and repairs. See record keeping for farm equipment rentals.

Fly control and sanitation

Wet feed under the bunk lip and in corners is a breeding spot for flies. Clean those areas first, and rinse bunks if water use fits your system. Keep manure and waste piles well away from bunks, and cover or compost them. Fly traps and larvicides help, but they work best when bunks are clean. Ask your veterinarian or extension agent about fly control that fits your herd and local rules.

Winter and wet weather

Frozen feed sticks to bunks and breaks blades. In winter, clean while feed is loose, and break up ice with a scraper before using a powered unit. In wet weather, slippery floors make skid steers harder to control, so slow down and use tire chains if needed. Keep an eye on drainage so water does not stand in alleys, which can turn into mud and ice.

Training the operator

A bunk cleaner is simple, but a careless operator can hurt animals, workers and the bunk. Walk the operator through the route, gates and pinch points before the first pass. Agree on signals for animals in the alley, and make sure the operator knows how to stop and lower the attachment in an emergency. A short training session pays for itself.

Bottom line

A bunk cleaner saves labor and improves feed freshness. Match the blade to the bunk, clean on a schedule and manage waste responsibly.

Frequently asked questions

How often should I clean bunks?

Daily in most operations, more often in hot weather.

Do I need a skid steer?

Many cleaners mount on skid steers or loaders. Some are pull-type.

Will it damage concrete?

Not if blades are fitted and bunks are in good shape.

What do I do with the waste?

Compost or spread it promptly, away from water.

Keep reading

Livestock and Hay Equipment Rentals

Renting a Hay Elevator for Barn Storage

Rent a hay elevator to stack bales in a barn or loft: length, angle, powered vs manual, bale size, power needs, setup, loading flow, safety, fire prevention and cleaning.

Livestock and Hay Equipment Rentals

Renting a Meat Grinder for On-Farm Processing

Rent a meat grinder for on-farm processing: plate sizes, throughput, cooling, sanitation, cross-contamination, local rules for sale, safety and cleaning steps.

Livestock and Hay Equipment Rentals

Renting a Skid Steer with Grapple for Manure

Rent a skid steer with a manure grapple or fork for barn and lot cleaning: lift rating, tires or tracks, hydraulic flow, loading spreaders, safety and cleaning.

Livestock and Hay Equipment Rentals

Renting a Grain Bin for Temporary Storage

Rent a grain bin for temporary storage: sizes, aeration, fill and unload systems, moisture and temperature checks, pest control, site prep, safety and records.