Small grains, forage grasses, legumes and cover crops all go in the ground with a seed drill. A drill meters seed from a box, drops it through tubes and places it in a furrow at a set depth. Few farms use one more than a few days a year, so rental is a natural fit. Success depends on picking the right type, calibrating it with your seed and setting depth for the field in front of you. This guide walks through each step.
Drill types you will find
- Conventional grain drills. Single or double disc openers on a lighter frame, designed for tilled seedbeds. They are cheaper to rent and easier to pull.
- No-till drills. Heavier frames, coulters or heavy discs and strong down pressure to cut residue and sod. See no-till drill rentals: why farmers rent.
- Pasture and legume drills. Built with small-seed boxes and shallow depth control for clover, alfalfa and grasses. See renting a grain drill for pasture overseeding.
- Air seeders. Use airflow to carry seed to openers on a toolbar. See air seeder rentals for cover crops.
- Drills with fertilizer boxes. Place starter fertilizer with the seed or beside it.
Ask the dealer what each rental has planted and in what ground. A drill that does well in tilled loam may struggle in heavy corn residue.
Features worth comparing
- Working width and row spacing. Narrower spacing suits small grains, while wider spacing may suit row-planted soybeans or forages.
- Box capacity and number of boxes. Separate boxes for small and large seed save time.
- Metering. Fluted feed, cup or other types. Check which seeds the meters handle well.
- Openers. Single disc, double disc or coulter. Disc condition matters.
- Depth control. Gauge wheels, depth bands and hydraulic adjustment.
- Press or closing wheels. Firm seed-to-soil contact.
- Down pressure. Springs or hydraulics, important in firm ground.
- Transport. Fold design, width and lights.
Calibrating the drill
Seed charts on the lid are a starting point. Seed size, shape, treatment and moisture change how much falls through the meter. Calibrate with the seed you will plant.
- Set the drill to the chart for your seed and target rate.
- Jack up the drill, or use the method in the manual, and place a tray or bag under the tubes.
- Turn the ground wheel a measured number of revolutions, which equals a known fraction of an acre.
- Weigh the seed collected, and compute pounds per acre.
- Adjust the setting and repeat until the rate matches your target.
- Recheck after the first few passes in the field, since vibration and seed settling can change flow.
Small seeds such as clover and some grasses need especially careful settings and often a dedicated small-seed box. Your extension office can supply target rates and planting dates; see SARE publications and your state page.
Setting depth and speed
Plant small seed shallow, often a quarter to half inch for clovers and grasses, and deeper for large-seeded grains. Dig behind the drill and look at the actual depth, not the dial. Run at a steady, moderate speed. Too fast bounces the openers and spaces seed unevenly, and too slow wastes time. Slow on hills and rough ground.
Tractor and hitch
Drills are often drawn from the drawbar with hydraulics for lift and fold. Check weight, hitch type and remote needs against your tractor. See utility tractor rentals and renting a tractor: what to know before you book.
Inspect before you accept
Check discs for wear and play, bearings, seed tubes for cracks or plugs, meters for smooth turning, box lids, seals, tires, press wheels and lights. Look for old seed or rodent nests in the boxes. Record condition and photograph damage. See understanding rental equipment condition reports.
Cleaning and return
Empty and vacuum the boxes, brush the meters and blow out the tubes. Grease fittings as directed. Leftover seed can contaminate the next customer's crop, so cleaning is serious. See returning farm equipment: cleaning and fuel rules.
Costs and terms
Ask about daily and weekly rates, deposit, calibration help, delivery, wear charges, breakage responsibility and cleaning fees. Compare with custom seeding if you have few acres. See how to budget for farm equipment rentals and understanding rental agreements.
Safety
- Keep bystanders clear and never go under a raised drill without supports.
- Watch for pinch points at fold joints.
- Treated seed is hazardous. Wear gloves and follow the label.
- Use transport locks and lights on roads.
- Shut down before servicing. See the farm machinery lockout-tagout procedure template.
See the OSHA agricultural operations page.
A simple booking plan
Call the dealer or district early, ask for the manual and calibration chart and request a short walkthrough at pickup. Have seed on hand before the drill arrives so you can calibrate the same day. Keep a backup day in the rental window for rain.
Common mistakes to avoid
- Trusting the lid chart. It is a starting point only. Seed lots differ in size and weight, so calibrate every time.
- Planting too deep. Small seed buried deeply often never emerges. Dig and measure behind the drill.
- Ignoring seed boxes. Old seed, mouse nests and moisture can block meters. Open every lid at pickup.
- Driving too fast. Bouncing openers place seed unevenly and cause stripes in the stand.
- Skipping the walkaround. A missing pin or flat tire found in the field costs a day of the rental.
Questions to ask the owner
- What seed species has this drill handled well?
- Does it include a small-seed box and the right agitators?
- When were discs and bearings last replaced?
- Can I borrow the manual and calibration chart?
- Who do I call if a meter fails mid-field?
Bottom line
A rented seed drill pays off when you choose the right type, calibrate with your seed, set depth by digging and return the machine clean. Book early, check the openers and meters and plan around weather.
Frequently asked questions
Do I have to calibrate a rented drill?
Yes. Seed charts are estimates. Calibrate with your own seed to hit the target rate.
What depth should I plant small seeds?
Typically shallow, about a quarter to half inch for clovers and many grasses. Confirm with local extension guidance.
Can one drill plant grain and small seed?
Many can if they have separate boxes or a small-seed attachment. Ask the owner before you book.
Why does cleaning matter?
Leftover seed can contaminate the next customer's crop, and dirty returns often cost cleaning fees.