Farm Equipment Rentals
Livestock and Hay Equipment Rentals

Renting a Silage Defacer for Feed Access

Rent a silage defacer to cut clean faces in bunkers and piles: types, loader mounts, feed-out rates, shrink control, safety near faces, tractor needs and costs.

5 min read1,059 wordsUpdated November 2026
Renting a Silage Defacer for Feed Access: illustration of a livestock trailer and squeeze chute beside a hay barn

The face of a silage bunker or pile is where air meets feed. A ragged, loose face lets oxygen penetrate and heat up the silage, which wastes feed. A defacer or facer cuts a clean face and removes feed in controlled layers. Renting one lets a farm test the tool for a season. Always work from a safe distance and follow guidance from your extension office, NIOSH and OSHA.

What the attachment does

A silage facer or defacer uses a rotating drum, blades or a shear to cut feed from the face. The cut stays smooth and tight, and the feed falls in a loose pile for loading. Some attachments work with a skid steer, and others with a wheel loader or telehandler.

Compare with renting a bale grapple for handling for other loader attachments and silage bagger rentals for storage for bags.

Why a clean face matters

Silage is fermented and stable when oxygen is excluded. Once the face is open, oxygen enters, and yeasts and molds can grow. A loose face with cracks lets air go deeper. A tight, vertical face with a smooth surface limits that penetration. Faster feed-out also helps. See SARE publications and your state page.

Renting a Silage Defacer for Feed Access: illustration of a livestock trailer and squeeze chute beside a hay barn
Illustration: a livestock trailer and squeeze chute beside a hay barn. Original artwork for Farm Equipment Rentals.

Feed-out rate

Plan to remove enough silage each day to keep fresh feed exposed. Rates depend on temperature and face area, so check your extension service for recommendations. In warm weather, feed out faster. If the face is too wide for your herd size, consider narrowing it with a barrier or dividing the pile.

Types of attachments

  • Silage defacers. Cut and fluff silage from the face.
  • Silage facers (shear grabs). Shear off a block of silage without tearing.
  • Bucket with a shear blade. Cuts clean edges.
  • Self-loading silage wagons. Load and transport.

Ask which attachment suits your loader and silage type.

Loader fit

Check lift capacity, hydraulic flow and mounting system. Attachments can be heavy and affect stability. Use ballast if needed. See renting a skid-steer: uses and rates and renting a tractor with front-end loader.

Face safety

Silage faces can collapse. The face can overhang, and slabs can fall on equipment and people. Keep workers and animals away from the face. Work from the front, not below the face. Do not stand or park below a high face. Keep the face height within safe limits and follow guidance. See CDC NIOSH agriculture and the OSHA agricultural operations page.

Common mistakes to avoid

  • Working under overhangs.
  • Leaving ragged faces.
  • Feeding out too slowly.
  • Overloading the loader.
  • Ignoring attachment wear.

Inspect before you accept

Check blades, drums, bearings, hydraulic hoses, quick-attach and welds. Test all functions. Photograph existing damage. See understanding rental equipment condition reports.

Safety

Transport

Attachments can be wide. Secure them for travel. See the equipment transport tie-down checklist.

Costs and terms

Ask about daily and weekly rates, delivery, deposit and wear charges. See how to budget for farm equipment rentals and understanding rental agreements.

Planning feed-out

Check face height, width and condition. Plan daily removal amounts and the cutting pattern. Keep tarps and weights ready to cover the face between uses. Set clear rules for who can work near the face. Keep records of feed-out and waste.

Troubleshooting

If the face is ragged, check blade sharpness and technique. If slabs fall, reduce face height and cut from the top. If the loader is unstable, reduce load. If hydraulics lag, check fluid and hoses. Contact the dealer when unsure.

Cleaning and return

Remove silage and dirt, wash and grease. See returning farm equipment: cleaning and fuel rules.

A sample season

A dairy rents a defacer for the winter feeding season. The operator cuts a clean vertical face, removes a measured layer each day and covers the face between feedings. Shrink drops, and the feed stays cool. The dairy returns the attachment clean.

Questions to ask the dealer

  1. What loader specs does it need?
  2. What face height is it designed for?
  3. How worn are the blades?
  4. What are the cleaning requirements?
  5. Can I try it first?

Keeping records

Record dates, face dimensions, feed-out amounts and repairs. See record keeping for farm equipment rentals.

Covering and sealing the face

Between feedings, cover the exposed face with plastic or a tarp and weight it down. Cover the top and the sides so air cannot sneak in. Some farms use oxygen barrier film on the surface of the pile and roll it back only as needed. If you can, cut a fresh face only as deep as the day's feed-out needs. A cover takes a few minutes to place and can save tons of feed over the season.

Equipment stability near the face

Heavy loaders working at a silage face can slip on wet or frozen ground. Keep tires clean, avoid driving close to edges, and use the lowest loader height that does the job. Walls and ramps need to be sturdy and clear of debris. If your loader has a cab, keep the door closed and use a seatbelt. Never leave a machine running unattended near a face.

Choosing between a facer and a bucket

A standard bucket can work for small piles, but it tends to tear the face and loosen slabs. A facer or defacer cuts cleaner, which reduces shrink and keeps the face tighter. If you only feed a few tons a day, the difference may be small, and a rental trial can show whether the attachment pays. Track shrink and labor time during the rental so you can compare with your usual method.

Bottom line

A clean, tight silage face saves feed. Use the right attachment, feed out at a good rate and keep everyone away from overhangs.

Frequently asked questions

Why does the face matter?

Air entry causes heating and spoilage. A tight face limits it.

Is a defacer safer than a bucket?

Often yes, because it cuts without pulling slabs, but face safety still matters.

How fast should I feed out?

It depends on weather and face size. Check local guidance.

Can I use a skid steer?

Yes, if lift, hydraulics and mounting fit.

Keep reading

Livestock and Hay Equipment Rentals

Roller Mill Rentals for Grain Processing

Rent a roller mill to crack, crimp or flake grain: roll gap, corrugation, throughput, moisture, power, dust control, feed quality, safety, cleaning and when it beats grinding.

Livestock and Hay Equipment Rentals

Renting a Hoof Trimming Chute for Cattle

Rent a hoof trimming chute for cattle: tilt tables vs lift chutes, restraints, setup, handling stress, hygiene, safety and cleaning, with tips on working with a trimmer.

Livestock and Hay Equipment Rentals

Renting a Loading Chute for Cattle

Rent a cattle loading chute: fixed vs portable, ramp slope and width, side rails, cleats, trailer height match, setup, animal flow, safety and cleaning after use.

Livestock and Hay Equipment Rentals

Renting a Manure Belt for Barn Cleaning

Rent a manure belt or barn cleaner: gutter and alley systems, belt vs chain, capacity, power, spreader pairing, odor and nutrient handling, safety and cleanup rules.