Bale conveyors move hay from wagons or trucks to a barn, stack or trailer. They cut labor and reduce lifting injuries. A rental conveyor helps with a short haying season or a special event, such as a sale. This guide covers choosing, setup and safe use.
Types
- Flat belt or slat conveyors. Move bales along a flat path.
- Inclined elevators. Lift bales up an angle.
- Roller and gravity conveyors. Move bales with minimal power.
- Portable folding units. Move quickly between sites.
See renting a hay elevator for barn storage for inclined units.
Matching to bales
Check width, length and capacity. Bale size and weight differ between small squares, large squares and rounds. Conveyors designed for small squares may not handle larger bales. Ask the dealer about capacity per foot and speed.
Power and controls
Check power source and controls. Electric motors need proper wiring and protection. Gas engines need safe fuel storage and ventilation. Controls should be easy to reach and include an emergency stop. Inspect cords and connections.
Setting up
- Level the unit and chock wheels.
- Anchor if needed.
- Position the feed end near the wagon or truck.
- Plan the landing area for bales.
- Check guards.
- Test empty, then with a few bales.
- Assign roles. Loader, spotter and stacker.
Workflow
Keep the flow steady. Do not overload the conveyor. Place bales squarely. Watch for jams at transitions. Remove bales at the landing promptly. Keep walkways clear, and keep people out of the path of moving bales.
Hay moisture and storage
Moist hay can heat and spoil. Test moisture, and store only hay that is dry enough per local guidance. See SARE publications and your state page. Plan air gaps in stacks, and check for heat.
Common mistakes to avoid
- Overloading.
- Unlevel setup.
- Poor lighting.
- No spotter.
- Ignoring jams.
Inspect before you accept
Check belts or chains, rollers, frame, wheels, motor, guards and controls. Run it empty. Photograph existing damage. See understanding rental equipment condition reports.
Safety
- Lock out before clearing jams. See the farm machinery lockout-tagout procedure template.
- Keep hands and clothing away from belts and chains.
- Use gloves and safe lifting.
- Keep children away.
- Watch for slippery surfaces.
- Keep a first aid kit nearby.
See the OSHA agricultural operations page and CDC NIOSH agriculture.
Transport
Conveyors can be long. Secure for travel. See the equipment transport tie-down checklist.
Costs and terms
Ask about daily and weekly rates, delivery and deposit. See how to budget for farm equipment rentals and understanding rental agreements.
Planning the day
Check weather and hay moisture. Line up helpers, wagons and stacking space. Plan routes for trucks and wagons. Keep water, gloves and first aid. Take breaks. Record counts.
Troubleshooting
If bales slip, check angle and belt condition. If the belt wanders, adjust tracking. If the motor trips, reduce load. If the unit shifts, add chocks. Contact the dealer when unsure.
Cleaning and return
Remove hay and dust, grease fittings and wipe down. See returning farm equipment: cleaning and fuel rules.
A sample day
A hay farm rents a 20-foot conveyor for a weekend to load a truck for a buyer. The farmer sets the conveyor level, uses two loaders and a stacker and finishes the load in a few hours. The conveyor is cleaned and returned.
Questions to ask the dealer
- What length and capacity?
- What bale sizes does it handle?
- What power does it need?
- What are the cleaning requirements?
- Can it be delivered?
Loading trucks and trailers
When loading a truck, stack bales evenly and tie them down. Keep the load within weight and height limits. Check local hay hauling rules and any required straps or tarps. Balance the load over the axles. See DOT requirements for rented equipment transport.
Keeping records
Record dates, bale counts and issues. See record keeping for farm equipment rentals.
Choosing between a conveyor and a loader
A bale conveyor suits steady flows of the same bale size, such as loading trucks all day. A loader with a spear or grapple suits mixed sizes and irregular piles. For small squares, a conveyor often saves the most labor, and for large rounds, a loader usually fits better. If you stack in a barn, the elevator and conveyor together can move bales from wagon to loft with few lifts. Ask the dealer for advice based on how you work.
Lighting and working at night
Hay often has to be moved in the evening when it is dry and cool. Add work lights at the feed end, the landing and walkways. Keep cords out of walkways, and use outdoor-rated fixtures. Make sure everyone can see the stop switch. If visibility is poor, stop and wait for daylight rather than risking an injury.
Handling mixed bale sizes
If you move bales of different sizes, sort them before they reach the conveyor. Small bales can catch in gaps meant for large ones, and big bales can overload the belt. Use a ramp or barrier to guide bales onto the center of the belt. Keep a hook or bar nearby to adjust bales safely without reaching into the machine.
Insurance and helpers
Check whether your farm policy covers rented equipment and helpers. If you hire workers for a hay day, confirm workers' compensation rules in your state. Keep a copy of the rental agreement on site, and write down the names of everyone who helps in case a question comes up later.
After the job
Shut off power and let the motor cool before cleaning. Sweep hay and dust from the conveyor and surrounding floor, since loose hay is a fire hazard. Fold or lower the unit for transport and tie it down. Walk the area for dropped tools and gloves, and write down the bale counts before you forget them.
Bottom line
A bale conveyor saves labor and backs when set level, fed steadily and guarded. Match it to your bales and keep people clear.
Frequently asked questions
What conveyor length do I need?
Long enough to reach from the wagon to the landing without steep angles.
Can I use a conveyor for round bales?
Only if it is rated for them. Ask the dealer.
What is the biggest risk?
Pinch points and jams. Lock out before clearing.
Do I need a spotter?
Yes when trucks or wagons move nearby.