Farm Equipment Rentals
Planting, Seeding and Transplanting

Renting a Grain Auger for Seed Handling

Rent a grain auger to move seed and grain: portable and sweep types, sizing, power, angle and capacity, seed damage, power line safety, setup, moving and cleanup between lots.

5 min read998 wordsUpdated November 2026
Renting a Grain Auger for Seed Handling: illustration of a planter leaving straight seed rows behind a tractor

Grain augers are among the most common farm rentals, because they are costly and used mostly in a few busy weeks. They fill bins, load trucks and move seed to planter tenders. They are also among the most dangerous machines on the farm. This guide explains how to choose and use an auger for seed and grain, and how to do it safely.

How a grain auger works

A grain auger is a tube with a helical flighting inside. A drive rotates the flighting, which carries grain or seed up the tube from the hopper to the discharge spout. Types include:

  • Portable augers. Hitch to a tractor or truck and use PTO, electric or engine drive. Most common.
  • Swing-away and swing-hopper units. Allow hopper positioning around trucks and bins.
  • Sweep augers. Mounted in bins to clean out the last grain. See renting a grain vac for bin cleanout.
  • Belt conveyors. Gentler on delicate seed.
  • Mover augers and mounted units for specific setups.

Ask the owner what products the auger has moved, including seed and treated grain.

Choosing size

  1. Length. Long enough to reach the top of your bin or truck at a safe angle.
  2. Diameter. Larger tubes move more grain but need more power.
  3. Capacity. Bushels per hour at a given angle.
  4. Angle. Steeper angles reduce capacity. Many augers are rated at a typical working angle.
  5. Drive. PTO, electric or hydraulic, matched to your tractor or power source.
  6. Hopper design. Size and shape for trucks or trailers.
  7. Weight and transport. Check hitch and brake needs.

Make sure the auger reaches your bin without being fully extended or too steep.

Renting a Grain Auger for Seed Handling: illustration of a planter leaving straight seed rows behind a tractor
Illustration: a planter leaving straight seed rows behind a tractor. Original artwork for Farm Equipment Rentals.

Protecting seed

Augers can crack seed or damage coatings. To reduce damage:

  • Run the auger full. Partially filled flighting bounces seed.
  • Use lower speeds for soybeans, corn seed and treated seed.
  • Keep the angle moderate.
  • Avoid hard drops into bins or trucks.
  • Inspect seed for cracks.
  • Consider belt conveyors for fragile seed.

Treated seed adds other issues, such as dust and residue. Follow label handling and cleaning guidance, and see the EPA agriculture page.

Setting up

  1. Choose a level, firm spot. Chock wheels and set the hitch.
  2. Check clearance. Look up and around for overhead lines.
  3. Position the hopper under the truck or tender.
  4. Check guards. All flighting and drive guards must be in place.
  5. Raise the auger slowly with a stable, level base.
  6. Start empty, then feed grain gradually.
  7. Watch the discharge. Shut off before the bin or truck is full.

Do not leave the auger running unattended.

Power line safety

Contact with overhead power lines is a leading cause of farm electrocutions. Before raising an auger, survey the area for lines. Keep the auger and any equipment far from lines, with distances recommended by utilities. Lower the auger before moving it. Never move a raised auger. Know the emergency steps if contact occurs: stay in place unless there is fire, and call for help. See the OSHA agricultural operations page and the CDC NIOSH agriculture page.

Entanglement and other hazards

  • Keep guards on the hopper, intake and drives.
  • Never step on or into running augers.
  • Never clear a plugged auger while it is running. Shut it down and lock out the power. See the farm machinery lockout-tagout procedure template.
  • Keep children and bystanders away.
  • Do not wear loose clothing.
  • Keep PTO shields intact. See the PTO safety shield inspection form.
  • Watch for grain bridging and bin hazards. Never enter bins with moving augers or while grain is flowing.

Moving and storing

Lower the auger fully before moving. Lock transport brackets. Use lights and slow-moving vehicle signs on public roads, and check weight and width. See DOT requirements for rented equipment transport and oversize load permits for rented equipment.

Common mistakes to avoid

  • Raising near power lines.
  • Running with guards removed.
  • Clearing jams while running.
  • Running empty at high speed.
  • Overloading the tractor or hitch.

Inspect before you accept

Check the flighting, tube, bearings, drive shaft, guards, hopper, lift cable, winch, tires and hitch. Look for bent flighting and worn spots. Photograph existing damage. See understanding rental equipment condition reports.

Costs and terms

Ask about daily and weekly rates, deposit, delivery and damage terms. Compare with hiring custom handling. See how to budget for farm equipment rentals and understanding rental agreements.

Cleaning and return

Run the auger empty to clear grain, then sweep out the hopper and spout. Wash and dry the machine, then check for leftover seed that could contaminate the next customer. See returning farm equipment: cleaning and fuel rules.

A sample day

A farmer fills a seed tender and a storage bin using a rented 8-inch auger. Before raising it, the farmer walks the area for power lines, chocks the wheels and checks guards. The auger runs full at moderate speed to protect seed. When the bin is nearly full, the farmer shuts down the power before checking the level. Later, the farmer runs the auger empty, cleans the hopper and returns it.

Questions to ask the owner

  1. What diameter, length and capacity does it have?
  2. What drive and power does it require?
  3. Are all guards and shields in place?
  4. Has it handled seed or treated grain?
  5. What cleaning standard applies at return?

Bottom line

A rented auger moves seed and grain quickly, but safety and seed protection come first. Choose the right size, plan around power lines, keep guards in place and clean the machine before return.

Frequently asked questions

How do I avoid cracking seed in an auger?

Run it full at lower speeds, with a moderate angle, and avoid hard drops. Consider belt conveyors for fragile seed.

What is the biggest auger hazard?

Contact with overhead power lines and entanglement in unguarded flighting.

Can I clear a jam with the auger running?

No. Shut it down and lock out the power first.

What size auger do I need?

Pick length and diameter that reach your bin at a safe angle with enough capacity for your work.

Keep reading

Planting, Seeding and Transplanting

Renting a Straw Blower for Mulching

Rent a straw blower to mulch seeded areas, gardens and slopes: bale handling, blowing distance, application depth, tackifier, hay versus straw, weed seed risks and safety.

Planting, Seeding and Transplanting

Hydroseeder Rentals for Erosion Control

Rent a hydroseeder to stabilize bare slopes, pond banks and waterways: tank sizes, agitation, mulch and tackifier mixes, seed choice, application rates, timing and cleanup.

Planting, Seeding and Transplanting

Renting a Strawberry Planter

Rent a strawberry planter for plasticulture or matted rows: bareroot crowns, bed shape, spacing, crown depth, drip tape, timing, crew needs and first-year aftercare.

Planting, Seeding and Transplanting

Plastic Mulch Transplanter Rentals

Rent a plastic mulch transplanter to set plants through film: hole punching versus planting, spacing, film width, drip tape alignment, soil moisture, crew roles and cleanup.